Abstract:Zirconia (ZrO2) ceramics have excellent mechanical properties and high-temperature conductivities. However, ZrO2 ceramics do not possess room-temperature conductivity, which significantly limits their application as functional components in smart communication devices and wearable smart products. To achieve room-temperature conductivity in ZrO2 ceramics, this study prepared a network-structured TiC–ZrO2 composite conductive ceramic with a low titanium carbide (TiC) addition using pressureless sintering. The influence of the TiC addition on the microstructure, mechanical properties, and electrical properties of the TiC–ZrO2 composite material was investigated. The results showed that the composite material consists of cubic zirconia (c-ZrO2), tetragonal zirconia (t-ZrO2), and titanium carbide (TiC) phases. When the TiC content was 11 vol %, the relative density, open porosity, flexural strength, and fracture toughness of the sample were 98.6 ± 0.1 %, 0.16 ± 0.06 %, 383 ± 38 MPa, and 4.66 ± 0.26 MPa m1/2, respectively. The electrical percolation threshold of the TiC–ZrO2 composite was between 8.0 and 11.0 vol %. When the TiC content is 18.8 vol %, the sample exhibited the lowest room-temperature resistivity of 3.00 × 10−5 Ω m. The electrical resistance of the TiC–ZrO2 composite material is mainly attributed to the grain boundary effect. With increasing TiC content, the resistivity of the composite material decreased, exhibiting linear conductivity and achieving conductive percolation characteristics.

Ceramic/Metal Composites with Positive Temperature Dependence of Thermal Conductivity

No temperature dependence of thermal conductivity of high impact polystyrene/Cu alloy composites: Effective medium theory study

Anomalous Conductivity Behavior Induced by in Situ Metastable Amorphous Phase in BaTiO3/Ni0.5Zn0.5Fe2O4 Ceramic Composite

Yttria-stabilized zirconia-based composites with adaptive thermal conductivity

Porous Yttria-Stabilized Zirconia Ceramics with Ultra-Low Thermal Conductivity. Part Ii: Temperature Dependence of Thermophysical Properties

Design for High-Performance Functional Composite Thermistor Materials by Glass/ceramic Composing

Effect of the Cooling Ways on the Properties and Microstructure of ZrO2/ZrW2O8 Ceramic Composites

High-performance Zero Thermal Expansion in Al Metal Matrix Composites

Effect of TiC addition on microstructure and properties of network structured TiC–ZrO2 composite conductive ceramics

Thermal Conductivity Measurement of the Epoxies and Composite Material for Low Temperature Superconducting Magnet Design

Strontium-Lead Titanate Based Composite Thermistor Materials

Design for strontium-lead titanate based composite thermistor materials via chemical processing

Study On The Properties And Conduction Mechanism Of Strontium-Lead Titanate Based Composite Thermistor Materials

Thermal Expansion Behavior of Copper Matrix Composite Containing Negative Thermal Expansion PbTiO 3 Particles

Novel low temperature derived W f /W-ZrC-Cu composites by reactive infiltration with enhanced mechanical and thermal physical properties

Negative thermal expansion in a zirconium tungstate/epoxy composite at low temperatures

Near-zero thermal expansion of ZrW2O8/Al–Si composites with three dimensional interpenetrating network structure

The Mechanical and Thermophysical Properties of ZrC/W Composites at Elevated Temperature

Silicone Resin-Based Composite Materials for High Thermal Stability and Thermal Conductivity

Temperature adjustable thermal conductivity and thermal contact resistance for liquid metal/paraffin/olefin block copolymer interface material