Abstract:Polyether sulfone (PES), which is a thermoplastic polymer, was added as a toughening agent to a bisphenol-A type epoxy resin to form a matrix of carbon-fiber-reinforced composites (CFRPs). For benchmarking, carboxyl-terminated butadiene acrylonitrile (CTBN), which is a rubber-based toughening agent, was added to the epoxy resin. The mechanical and thermal properties of the PES- and CTBN-toughened epoxy resins were compared. Dicyandiamide (DICY) was used as the hardening agent, whereas 3-(3,4-dichlorophenyl)-1,1-dimethylurea (DCMU) was used as the hardening accelerator. In addition, 4,4′-diamino diphenyl sulfone (DDS) was added to improve the dispersibility of PES in the epoxy resin. The CTBN-toughened epoxy resin exhibited improved impact strength and fracture toughness, but decreased tensile strength, tensile modulus, and glass transition temperature (Tg). The fracture toughness and Tg values of the PES-toughened epoxy resins increased with increasing amount of added PES. However, the tensile moduli and Tg values of the epoxy decreased upon addition of CTBN. The tensile and impact strengths of the specimen toughened with 10 phr PES increased by 14 % and 106 %, respectively, compared to those of the PES un-toughened epoxy resin. The ductility factor of the resin improved with increasing PES content. CTBN formed microvoids and CTBN particles within the epoxy matrix, which improved the fracture toughness of the resin, but deteriorated its tensile properties by stress concentration. In contrast, PES improved the properties of the epoxy resin. This was attributed to PES being well dispersed within the epoxy matrix, thereby absorbing the energy required for crack propagation. Hence, owing to their excellent mechanical properties, the PES-toughened epoxy resins were determined suitable for use as matrices for CFRPs.

Study on Toughness and Dielectric Property of Modified Cyanate Ester Resin

Morphology and mechanical properties of poly(ether-imide)-modified polycyanurates

Studies on the Phase Separation of Poly(Ether Imide)‐Modified Cyanate Ester Resin

Effect Of Polyethersulfone On The Mechanical And Rheological Properties Of Polyetherimide-Modified Epoxy Systems

Study on Properties of 5528 Cyanate Resin

Toughening of Epoxy Resin with Functionalized Core‐sheath Structured PAN/SBS Electrospun Fibers

Study on Toughening of Matrix Resins for Advanced Composite

Properties of Copolymer Modification of Epoxy Resin／Bismaleimide Resin／Cyanate Ester Resin

Cyanate ester resins toughened with epoxy-terminated and fluorine-containing polyaryletherketone

Investigation on Mechanical Properties and Thermal Expansibility of Epoxy Resin Copolymerization Modified Cyanate Ester under Medium‐low Temperature Curing Process

Synchronously Improved Toughness and Dielectric Properties of Cyanate Ester Resins Via Modification with Biobased Poly(n‐phenylmaleimide‐co‐limonene)

Toughening of bisphenol A and carboxyl-terminated butadiene-acrylonitrile to epoxy resin

The Study on Poly(ether Sulfone) Modified Cyanate Ester Resin and Epoxy Resin Cocuring Blends

Study on Properties of Cyanate Ester Resin Modified by Epoxy Silane

Effects of Prepolymerization Process on Dielectric Performance of Bismaleimide-Cyanate Ester Resin Systems

Cyanate Ester Resin Modified by Hydroxyl‐terminated Polybutadiene: Morphology, Thermal, and Mechanical Properties

Toughness modification of cationic UV-cured cycloaliphatic epoxy resin by hydroxyl polymers with different structures

Study of E-51 Epoxy Resin Modified Bisphenol A Cyanate Ester Resins

STUDY ON THE STRUCTURE AND PROPERTY OF ETBN TOUGHEN EPOXY RESIN

Evaluation of the Mechanical Properties of Polyether Sulfone-Toughened Epoxy Resin for Carbon Fiber Composites

Preparation, characterization, and performance of reactive phenolphthalein poly(aryl ether sulfone) tougheners highly compatible with epoxy resin