Abstract:The C=C double bonds in the main chain of hydroxyl-terminated polybutadiene (DHTPB), obtained by the degradation of polybutadiene rubber, were partially epoxided using m-chloroperoxybenzoic acid (mCPBA) as epoxidation reagent. A series of epoxided HTPBs (EHTPB) with different epoxy contents (5%, 10% and 15%) were prepared by tuning the molar ratio of mCPBA to C=C double bonds. The structures of EHTPBs were characterized by Fourier transform-infrared (FTIR), nuclear magnetic resonance (H-1-NMR) spectroscopy and gel permeation chromatography (GPC). The epoxy percent in EHTPBs from H-1-NMR spectra was in accordance with the design. In addition, a series of EHTPB-based polyurethane elastomers (EPU) were prepared by the reaction between EHTPB and 4,4'-diphenylmethane diisocyanate with 1,4-butanediol as a chain extender. Mechanical and thermal properties of the EPU samples were characterized by tensile test, differential scanning calorimetry (DSC) and thermal gravity analysis (TGA). With increased epoxy percent in EHTPB, the Young's modulus and the tensile strength of the EPU samples increased, whereas the elongation at break decreased. The sample EPU10 prepared with 10% of epoxy had the best mechanical properties with 8.82 MPa as Young's modulus, 7.83 MPa as tensile strength, and (485 +/- 23)% as elongation at break. The elasticity recovery of the EPU sample was slightly better than HTPB-based PU (EPU0). The results with TGA test showed that the thermal degradation of EPU, similar to EPU0, was divided into three stages. However, the EPU samples had better thermal stability with the initial degradation temperature at 210 degrees C, about 30 degrees C higher than that of EPU0. The DSC results showed that the glass transition temperature (T-g) of EPU gradually increased as epoxy percent was increased, though still lower than that of HTPB (FHTPB) based PUs prepared by free-radical polymerization.

Cyanate Ester Resin Modified by Hydroxyl‐terminated Polybutadiene: Morphology, Thermal, and Mechanical Properties

Modification of Unsaturated Polyester Resin by HTPB: Effect of Introducing Method of the Rubber

MODICATION OF BISPHENOL A DICYANATE ESTER BY EPOXIDIZED HYDROXYL-TERMINATED POLYBUTADIENE

Facile Access To Carboxyl-Terminated Polybutadiene And Polyethylene From Cis-Polybutadiene Rubber

Cleavable Polybutadiene Rubber: A Versatile Precursor to Hydroxyl-Terminated or Multi-Hydroxyl Polybutadiene and Polyethylene

Preparation and Properties of Epoxided Hydroxyl-terminated Polybutadiene Based Polyurethane Elastomers

Morphology and mechanical properties of poly(ether-imide)-modified polycyanurates

Toughening of bisphenol A and carboxyl-terminated butadiene-acrylonitrile to epoxy resin

STUDY ON DGE-BHBTMBP/E-51/DDS CURED

Curing Kinetics of Hydroxyl -Terminated Polybutadiene Modified Cyanate Ester Resin

Enhanced Mechanical and Dielectric Properties of an Epoxy Resin Modified with Hydroxyl-Terminated Polybutadiene

Toughening Of Epoxy Resin Using Reactive Liquid (Ctbn) Rubber

Toughening of Polylactide with Epoxy-Functionalized Methyl Methacrylate-Butadiene Copolymer

Mixed Hyperbranched Poly(aryl Ether Ketone) Results in High Toughness and Excellent Thermal Resistance in Epoxy Resin

Curing kinetics and mechanical properties of cyanate ester/hyperbranched benzoxazine copolymers

Toughening of Pbt/Pc Blends with Epoxy Functionalized Core-Shell Modifiers

Study of E-51 Epoxy Resin Modified Bisphenol A Cyanate Ester Resins

Toughening Enhancement Mechanism and Performance Optimization of Castor-Oil-Based Polyurethane Cross-Linked Modified Polybutylene Adipate/Terephthalate Composites

Chemical Modification Of Hydroxyl-Terminated Polybutadiene And Its Application In Composite Propellants

Synchronously Improved Toughness and Dielectric Properties of Cyanate Ester Resins Via Modification with Biobased Poly(n‐phenylmaleimide‐co‐limonene)

High‐performance thermoplastic toughener for bismaleimide resin: Feature application of reactive polyarylether ketone bearing propenyl group