Abstract:A feasible and effective approach was demonstrated for the preparation of Lignin modified PBAT biocomposites with enhanced tensile strength. Zinc stearate and epoxy soybean oil were introduced as the interfacial modifiers to construct dynamic bonds between lignin and PBAT, so as to improve the interfacial compatibility. The hydrophobicity of the composite was also improved after in‐situ interfacial modification. Poly(butylene adipate‐co‐terephthalate) (PBAT) is a type of synthetic biodegradable thermoplastic copolyester with comparable mechanical properties to polyethylene, but the application of PBAT is limited by factors such as high cost, short shelf life, poor weather and water resistance. In order to develop PBAT composites with high performance and low cost, lignin‐modified PBAT biocomposites with enhanced tensile strength were prepared via in‐situ construction of interfacial dynamic bonds. Zinc stearate and epoxy soybean oil were introduced as the interfacial modifiers to construct dynamic bonds between lignin and PBAT, so as to improve the interfacial compatibility. The results demonstrated that the lignin/PBAT biocomposite with interface modifiers reached the maximum tensile strength of 36.7 MPa and an elongation at break of 725.3% at the lignin content of 5 wt%, with the tensile strength achieved 5% improvement on the basis of pure PBAT (34.9 MPa and 717.6%). When the lignin content was increased to 10 wt%, the lignin/PBAT biocomposite with interfacial modifiers still maintained the tensile strength of 35.4 MPa and the elongation at break of 627.8%, which was 82% and 31% higher than that of the directly compounded sample without interfacial modifiers, respectively. Even when the content of lignin loading increased to 20 and 30 wt%, the mechanical properties of the composites were still significantly improved by adding modifiers. The hydrophobicity of the composite was also improved after in‐situ interfacial modification. The strategy demonstrated in this work provides an effective reference for the development of lignin/PBAT composites with high performance but low cost.

Toughening Enhancement Mechanism and Performance Optimization of Castor-Oil-Based Polyurethane Cross-Linked Modified Polybutylene Adipate/Terephthalate Composites

Modification of Unsaturated Polyester Resin by HTPB: Effect of Introducing Method of the Rubber

Enhancement on the properties of polypropylene using bamboo particles: Effect of particle sizes and loadings

Polypropylene biocomposites reinforced with bamboo particles and ultrafine bamboo-char: The effect of blending ratio

Toughening of PBT by POE/POE-g-GMA Elastomer Through Regulating Interfacial Adhesion and Toughening Mechanism

Toughening Modification of Poly(Butylene Terephthalate)/Polycarbonate Blends by Poly(Ethylene-Co-Octene)

Toughening modification of PBT/PC blends with PTW and POE

Lignin modified PBAT composites with enhanced strength based on interfacial dynamic bonds

Toughening Modification of Poly(butylene Terephthalate)/poly(ethylene Terephthalate) Blends by an Epoxy-Functionalized Elastomer

Improved Electrical Conductivity of TPU/carbon Black Composites by Addition of COPA and Selective Localization of Carbon Black at the Interface of Sea-Island Structured Polymer Blends.

Toughening of Poly (butylene Terephthalate) with Epoxy-Filled Poly (ethylene–octene) Copolymer

Toughening of Polylactide with Epoxy-Functionalized Methyl Methacrylate-Butadiene Copolymer

Cyanate Ester Resin Modified by Hydroxyl‐terminated Polybutadiene: Morphology, Thermal, and Mechanical Properties

3-Pentadecylphenol (PDP) as a Novel Compatibilizer for Simultaneous Toughened and Reinforced PA10,12 Composites

Development of poly(butylene adipate‐co‐terephthalate) composites with high thermal oxidation stability using Chrysanthemum morifolium extract as a natural additive

Functionalization of poly(butylene adipate‐co‐terephthalate) and its compatibilizing effect on PBAT/thermoplastic starch blends

Reinforcement of Castor Oil-Based Polyurethane with Surface Modification of Attapulgite.

Preparation of high‐performance poly(butylene adipate‐co‐terephthalate)/thermoplastic starch compounds with epoxidized soybean oil as compatibilizer

Investigation of Dual Network Construction for Toughening in Bio-Based Polyamide Composites

Preparation and Properties of Poly(Ethylene Terephthalate)/Poly(Butylene Terephthalate) Alloys with High Toughness

Study on the Poly(3‐hydroxybutyrate‐co−4‐hydroxybutyrate)‐based Composites Toughened by Synthesized Polyester Polyurethane Elastomer