Abstract:High-performance cyanate ester (CE) resins have attracted intensive interests due to low-k and heat resistant properties. However, the extreme high curing temperature and inherent brittleness severely limit their practical application. Herein, novel biobased poly(N-phenylmaleimide-co-limonene) (PML) microspheres were specially designed and synthesized by self-stabilized precipitation polymerization, which could simultaneously serve as effective curing agents and toughening modifiers for 2,2-bis(4-cyanatophenyl) propane (BADCy). The high density of unreacted endocyclic vinyl groups in PML could effectively react with BADCy, leading to lower curing temperature and good interfacial compatibility. Benefitting from both the weakly polarizable flexible chains and the highly crosslinked semi-interpenetrating network formed during the curing process, BADCy/PML resins exhibited highly enhanced toughness and reduced dielectric constant (epsilon). Specifically, the BADCy/PML resins showed minimum values of epsilon and dielectric loss of 2.61 and 0.0032 at 106 Hz, much lower than BADCy resins (2.88, 0.0052). More importantly, a maximum impact strength of 15.6 kJ/m2 was achieved at 10 wt% loading of PML, which was 86% higher than BADCy resin. In summary, this work developed a novel strategy to simultaneously improve toughness and dielectric properties of CE resins using bio-based PML copolymer, which have great potential in the fields of electronics and information technology. image

Effects of Prepolymerization Process on Dielectric Performance of Bismaleimide-Cyanate Ester Resin Systems

Curing, Thermal Stability and Composite Properties for Blends of the Novel Bismaleimide and Cyanate Containing Naphthalene

Cure of Neat Resins and Properties of Composites for Interpenetrating Polymer Networks from the Novel Bismaleimide and Cyanate Containing Naphthalene

Study on Curing Kinetics and Thermal Properties of Bismaleimide Resin Containing Ether Linkage

Study on Co-curing Behavior and their Laminate Properties of Low Bromined Epoxy/Cyanate Blends

Curing Behavior of the Bismaleimide Containing Ether Linkage and Naphthalene

Studies on the Phase Separation of Poly(Ether Imide)‐Modified Cyanate Ester Resin

Study on the Polyethersulfone/bismaleimide Blends: Morphology and Rheology During Isothermal Curing

Morphology and mechanical properties of poly(ether-imide)-modified polycyanurates

Thermal properties of an epoxy cresol-formaldehyde novolac/diaminodiphenyl sulfone system modified by bismaleimide containing tetramethylbiphenyl and aromatic ether structures

Viscoelastic Effects on the Phase Separation in Thermoplastics Modified Cyanate Ester Resin

Effect Of Polyethersulfone On The Mechanical And Rheological Properties Of Polyetherimide-Modified Epoxy Systems

Properties of Copolymer Modification of Epoxy Resin／Bismaleimide Resin／Cyanate Ester Resin

Preparation And Characterization Of Novel Bismaleimide Resins Modified With Diallyl Bisphenol A

Study on Toughness and Dielectric Property of Modified Cyanate Ester Resin

Preparation and Characterization of Bismaleimide-Diamine Prepolymers and Their Thermal-Curing Behavior

Study on Cure Reaction of the Blends of Bismaleimide and Dicyanate Ester

Phase Morphology and Mechanical Properties of a Poly(ether Sulfone)‐modified Bismaleimide Resin

Synchronously Improved Toughness and Dielectric Properties of Cyanate Ester Resins Via Modification with Biobased Poly(n‐phenylmaleimide‐co‐limonene)

Rheological study of crosslinking and gelation in bismaleimide/cyanate ester interpenetrating polymer network

Study on Properties of 5528 Cyanate Resin