Abstract:In the polyester‐based vitrimer system, adding PES results in PES long chains entangling within the dynamic covalent bond network. The entanglement and coiling of PES chains hinder the sliding and reorganization of the dynamic crosslinking network. This increases resin viscosity and improves film‐forming properties while also enhancing crosslinking density and mechanical properties. Diglycidyl ether of bisphenol A crosslinking with glutaric anhydride is used to form the conventional "covalent adaptive network", polyether sulfone (PES) by coiling and aggregating on the adaptive network is used to significantly increase the uncured resin viscosity for improving the processability of epoxy resin, but inevitably affecting the curing reaction and dynamic transesterification reaction. This study investigates the crucial roles of PES in curing dynamics and stress relaxation behavior. The results indicate that although PES does not directly participate in the crosslinking reaction of polyester‐based epoxy vitrimers. Moreover, the isothermal curing studies reveal that the addition of PES can greatly bring forward the reaction rate peak from conversion α = 0.6 to α = 0.2, meaning that the curing mechanism transfers from chemical control to diffusion control. Dynamic property analysis shows that the addition of PES significantly accelerates stress relaxation, especially at lower temperatures, leading to low viscous flow activation energy Eτ and relatively insensitive stress relaxation behavior to temperature. Introducing PES into vitrimer resin greatly improves crosslinking density (2.31 × 104 mol m−3), enhancing glass transition temperature (82.68 °C), tensile strength (68.66 MPa), and fracture toughness (6.25%). Additionally, the modified vitrimer resin exhibits satisfying shape memory performance and reprocessing capability.

The Study on Poly(ether Sulfone) Modified Cyanate Ester Resin and Epoxy Resin Cocuring Blends

Effect Of Polyethersulfone On The Mechanical And Rheological Properties Of Polyetherimide-Modified Epoxy Systems

Rheological Study of Epoxy Systems Blended with Poly(ether sulfone) of Different Molecular Weights

Study on the Polyethersulfone/bismaleimide Blends: Morphology and Rheology During Isothermal Curing

Studies on the Phase Separation of Poly(Ether Imide)‐Modified Cyanate Ester Resin

Morphology and mechanical properties of poly(ether-imide)-modified polycyanurates

Polymerization-induced phase separation in polyethersulfone modified epoxy resin systems: effect of curing reaction mechanism

Study on ester-amide exchange reaction between PBS and PA6IcoT

Rheological Behaviors and Structural Transitions in A Polyethersulfone-Modified Epoxy System During Phase Separation

Viscoelastic Effects on the Phase Separation in Thermoplastics Modified Cyanate Ester Resin

Cure Kinetics of an Epoxy Resin Containing Naphthyl/dicyclopentadiene Moieties and Bis‐phenoxy (3‐hydroxy) Phosphine Oxide System and Properties of Its Cured Polymer

Polymerization-induced viscoelastic phase separation in polyethersulfone-modified epoxy systems.

Preparation, Curing Properties, and Phase Morphology of Epoxy-Novolac Resin/multiepoxy-Terminated Low-Molecular-weight Poly(phenylene Oxide) Blend

Investigation on Thermal and Dimensional Stability of Epoxy Resin In-Situ Modified by Cyanate Ester Resin and Polydimethylsiloxane

Synchronously Improving Mechanical and Thermal Performances of Cured Epoxy Resins by Epoxidized Polyether Sulphones As Modifiers

Effect of Surface Functionalization of Molybdenum Disulfide Nanosheets with Polysulfone on Cyanate Ester Nanocomposites

Further Study of the Viscoelastic Phase Separation of Cyanate Ester Modified with Poly(ether Imide)

A novel biobased resin-epoxidized soybean oil modified cyanate ester

Phase Morphology and Mechanical Properties of a Poly(ether Sulfone)‐modified Bismaleimide Resin

Investigation on Polyether Sulfone Toughening Epoxy Vitrimer: Curing and Dynamic Properties

Liquid Crystalline Epoxy Resin Modified Cyanate Ester/Epoxy Resin Systems