Abstract:The thermal and dimensional stability of epoxy resin(EP)in-situ modified by cyanate ester(CE)and polydimethylsiloxane (PDMS) are investigated by means of experiments and numerical simulation. Thermal gravimetric analysis(TGA)and differential scanning calorimeter(DSC)are used to analyze the heat resistance of the modified EP. The dimensional stability is characterized by the volume shrinkage of the series PDMS/CE/EP obtained by the density method. The chemical structure of the PDMS/CE/EP is analyzed by Fourier transform infrared spectroscopy(FTIR). The results of TGA and DSC indicate that the thermal stability of PDMS/CE/EP decreases firstly and then increases with the increase in the amount of CE. The addition of PDMS shows a slight effect on the thermal stability. The 40％ CE makes the blending system exhibit the lowest initial decomposition temperature,which reduces by 15.5％ and 40.8％ compared with pure EP and CE,respectively. The FTIR results suggested that the influence of CE on the thermal stability of the modified EP is mainly ascribed to the generation of oxazolidinone ring with low thermal stability and the increase in the triazine ring with high thermal stability. The volume shrinkage measurement results show that the introduction of CE and PDMS are both beneficial to the improvement of the dimensional stability of the blending systems. The in-situ addition of 80％ CE shows the lowest volume shrinkage of 6.11％. The thermal stress distribution of PDMS/CE/EP generated during the solidification process is simulated by the finite element analysis. The results suggested that the introduction of 80％ CE into EP results in the lowest thermal stress in the blending system,which indicates that the system has the lowest volume shrinkage,which agrees well with the experimental results.

Liquid Crystalline Epoxy Resin Modified Cyanate Ester/Epoxy Resin Systems

Study on Co-curing Behavior and their Laminate Properties of Low Bromined Epoxy/Cyanate Blends

Synthesis and Curing of a Novel Combined Liquid Crystalline Epoxy

Highly Thermal Conductive Benzoxazine‐epoxy Interpenetrating Polymer Networks Containing Liquid Crystalline Structures

Effects of the Heating Rate and the Amount of Organic Montmorillonite on the Thermal Properties of the Novel Liquid Crystalline Epoxy Nanocomposite

Studies on the Phase Separation of Poly(Ether Imide)‐Modified Cyanate Ester Resin

Thermal properties of an epoxy cresol-formaldehyde novolac/diaminodiphenyl sulfone system modified by bismaleimide containing tetramethylbiphenyl and aromatic ether structures

Modification and Flexible Film of CE

Investigation on Mechanical Properties and Thermal Expansibility of Epoxy Resin Copolymerization Modified Cyanate Ester under Medium‐low Temperature Curing Process

Relationship between the structure of the bridging group and curing of liquid crystalline epoxy resins

Cationic Photopolymerization of Liquid Crystalline Epoxide in Mesogenic Solvents and Its Application in Polymer-Stabilized Liquid Crystals

The Study on Poly(ether Sulfone) Modified Cyanate Ester Resin and Epoxy Resin Cocuring Blends

Investigation on Thermal and Dimensional Stability of Epoxy Resin In-Situ Modified by Cyanate Ester Resin and Polydimethylsiloxane

Study on the properties of biphenyl liquid crystalline epoxy modified epoxy molding compound

A novel biobased resin-epoxidized soybean oil modified cyanate ester

Cure of CE/EP/A System and Properties of the Film

Thermal Conductivity and Orientation Structure of Liquid Crystalline Epoxy Thermosets Prepared by Latent Curing Catalyst

Rational Design and Synthesis of a Novel LCE Material and Its Curing Behaviours

Synthesis and Characterization of a Liquid Crystalline Epoxy Containing Azomethine Mesogen for Modification of Epoxy Resin

Study on Properties of Cyanate Ester Resin Modified by Epoxy Silane

Network Morphology and Electro-Optical Characterisations of Epoxy-Based Polymer Stabilised Liquid Crystals