Abstract:The rheological behavior and gelation characteristics of epoxy blends are of critical importance to property study and industrial application. In this work, we studied the rheological behavior and structural transition of different thermoplastics, including polyetherimide, polymethylmethacrylate, and polyethersulfone (PES), modified epoxy systems by using rheometry instrument, differential scanning calorimetry, time-resolved light scattering, and scanning electronic microscopes. At the same molecular weight level of thermoplastics, different epoxy blends show profound diversities on the rheological and gelation behavior due to the large differences in phase separation and curing process. For early phase-separation systems of PES-modified epoxy blends, two gel points are identified, which correspond to physical gelation and chemical gelation, respectively. With the variation of the PES molecular weight and curing rate, dramatic changes in gel time and critical exponent were observed. As the molecular weight of thermoplastics is increased, the gelation time becomes shorter and the gel strength gets lower, while the faster curing rate would increase the physical gel strength significantly.

Rheological Behaviors and Structural Transitions in A Polyethersulfone-Modified Epoxy System During Phase Separation

Polymerization-induced viscoelastic phase separation in polyethersulfone-modified epoxy systems.

Rheological Study of Epoxy Systems Blended with Poly(ether sulfone) of Different Molecular Weights

Polymerization-induced phase separation in polyethersulfone modified epoxy resin systems: effect of curing reaction mechanism

Effect Of Polyethersulfone On The Mechanical And Rheological Properties Of Polyetherimide-Modified Epoxy Systems

Viscoelastic Effects on the Phase Separation in Thermoplastics-Modified Epoxy Resin

Study on the Polyethersulfone/bismaleimide Blends: Morphology and Rheology During Isothermal Curing

Morphology Evolution During the Phase Separation of Polyetherimide/Epoxy Blends

Gelation Behavior of Thermoplastic-Modified Epoxy Systems During Polymerization-Induced Phase Separation

Kinetics of Phase Separation at the Early Stage of Spinodal Decomposition in Epoxy Resin Modified with PEI Blends

Viscoelastic Effects on the Phase Separation in Thermoplastics Modified Cyanate Ester Resin

Studies on the viscoelastic phase separation in epoxy resin modified with polyethersulfone

Polymerization Induced Phase Separation in Poly(ether Imide)-Modified Epoxy Resin Cured with Imidazole

Viscoelastic phase separation in polyethersulfone modified bismaleimide resin

Studies on the phase separation of polyetherimide-modified epoxy resin, 3 - Part 1 - Morphology development of the blend during curing

Studies on the Phase Separation of a Polyetherimide-Modified Epoxy Resin, 4. Kinetic Effect on the Phase Separation Mechanism of a Blend at Different Cure Rates

Rheological study on structural transition in polyethersulfone-modified bismaleimide resin during isothermal curing

Rheological Study on Structural Transition in Polyethersulfone‐modified Bismaleimide Resin During Isothermal Curing

Studies on the Phase Separation of Polyetherimide-Modified Epoxy Resin, 3. Morphology Development of the Blend During Curing

Hydrodynamic Effect on Secondary Phase Separation in an Epoxy Resin Modified with Polyethersulfone

Studies On The Phase Separation Of A Polyetherimide Modified Epoxy Resin. Vi. Effect Of Surface Energy On Reaction-Induced Phase Separation Of Epoxy Resin Modified With Polyetherimide