Synchronously Improving Mechanical and Thermal Performances of Cured Epoxy Resins by Epoxidized Polyether Sulphones As Modifiers

Weiping Xu,Guochen Wang,Dong Chen,Wantai Yang,Yuhong Ma

DOI: https://doi.org/10.1002/macp.202300351

IF: 2.996

2024-01-01

Macromolecular Chemistry and Physics

Abstract:As an effort to improve toughness of epoxy resins without scarifying their heat resistance, four novel polyether sulphones (PESs) with epoxy groups (PES-Es) are developed as efficient toughness modifiers of epoxy resins. The influences of PES-E on the mechanical property, curing kinetics, thermal, and mechanical properties of the diglycidyl ether with bisphenol-A (DGEBA) are investigated. The impact strength of PES-E/DGEBA composites is significantly improved from 16.6 to 28.9 kJ m-2 with optimal content of PES-E. Different from the composites of typical PES and epoxy which have two-phase structure, PES-E/DGEBA composites exhibit a single-phase structure owing to the participation of PES-E in the curing reaction of epoxy groups and good solubility of PES-E in DGEBA. Furthermore, the thermal stability of the PES-E/DGEBA composites is slightly increased compared to the neat epoxy resin due to the formation of crosslinked semi-interpenetrating polymer networks. The glass transitionnal temperature (Tg) of PES-E/DGEBA composites is up to about 184 degrees C, 46 degrees C higher than the neat epoxy resin with the same hardener, which have great potential in high-performance composites. The method developed in this seminal report makes it possible to improve the toughness of epoxy resins without trading-off the Tg and tensile strength. Novel polyether sulphones (PESs) with epoxy groups (PES-Es) are developed as efficient toughness modifiers of diglycidyl ether with bisphenol-A (DGEBA) epoxy resins. Compared with the common PES toughened epoxy resins, both the transitional temperature and toughness of the PES-E/DGEBA composites are improved significantly.image