Abstract:High performance engineering thermoplastics modified epoxy resins are novel materials avoiding the usual shortcomings of rubber modification (i.e., reduction of glass transition temperature, yield strength, and elastic modulus), and having improved impact strength and fracture toughness [1, 2]. Although the use of thermoplastic modifier has been important for the improvement of fracture toughness is a mechanical property high performance epoxy resins, there is limited information concerning the interfacial control between thermoplastic modifier and epoxy resins [3]. And in most cases, commercial thermoplastics are directly used as modifiers without effective control of the interface between the dispersed phase and the cured epoxy resin. There are two ways to improve the interfacial adhesion between the dispersed thermoplastics phase and the cured epoxy resin. The first is to chemically modify or functionalize the thermoplastics modifier. The second is to introduce mutual interaction, such as dipole-dipole interaction, hydrogen-bonding etc., into the curing system to improve the compatibility. Recent studies have shown that the interfacial adhesion between thermosets and thermoplastics can be dramatically improved when interdiffusion is possible [4]. Here, we prefer the second way since the development of functional polymers is still limited to the laboratory and it is a high cost process. This paper reports the incorporation effect of a second thermoplastics modifier (PC), on the phase separation behavior and morphology of PEI modified E-51 curing systems by using small angle laser light scattering (SALLS) and scanning electron microscopy (SEM, Hitachi S-570). The samples were made by incorporating various contents of polyetherimide (PEI; General Electric Co., USA) and polycarbonate (PC, based on bisphenonl-A; Idenitsu Kosan Co., Japan) into E-51 (a commercial grade epoxy resin based on diglycidyl ether of bisphenonl-A; Hangzhou Chemical Plant China) by weight. Then cured with 4,4 � diamino-diphenylsulphone (DDS; Chemical agent Co., China).

A new strategy to improve the toughness of epoxy thermosets by introducing the thermoplastic epoxy

Nonisothermal Reaction, Thermal Stability and Dynamic Mechanical Properties of Epoxy System with Novel Nonlinear Multifunctional Polyamine Hardener

STUDY ON DGE-BHBTMBP/E-51/DDS CURED

A New Strategy to Improve the Toughness of Epoxy Thermosets—By Introducing Poly(ether nitrile ketone)s Containing Phthalazinone Structures

Synchronously Improving Mechanical and Thermal Performances of Cured Epoxy Resins by Epoxidized Polyether Sulphones As Modifiers

Cycloaliphatic epoxy-functionalized polydimethylsiloxanes for comprehensive modifications of epoxy thermosets

Preliminary investigation of a second thermoplastic modifier incorporation effect on the phase behavior and morphology of epoxy/PEI curing systems

Isocyanate-terminated Polyethers Toughened Epoxy Resin:Chemical Modification,Thermal Properties,and Mechanical Strength

Diphenolic Acid-Derived Hyperbranched Epoxy Thermosets with High Mechanical Strength and Toughness

Catechol-Modified Epoxy Backbones for Multifunctional and Ultra-Tough Thermoset

Tetrafunctional Epoxy As an All‐purpose Modifier for Homopolymerized Bisphenol A Diglycidyl Ether

Epoxy Toughening Using Low Viscosity Liquid Diglycidyl Ether of Ethoxylated Bisphenol‐a

Bio-based epoxy resins derived from diphenolic acid via amidation showing enhanced performance and unexpected autocatalytic effect on curing

Mixed Hyperbranched Poly(aryl Ether Ketone) Results in High Toughness and Excellent Thermal Resistance in Epoxy Resin

Investigation on the Curing and Thermal Properties of Epoxy/Amine/Phthalonitrile Blend

Curing kinetics and shape-memory behavior of an intrinsically toughened epoxy resin system

Enhancing toughness, flame retardant, hydrophobic and dielectric properties of epoxy resin by incorporating multifunctional additive containing phosphorus/ silicon

Sustainably Sourced and DOPO-derived Triol As Hardeners for Epoxy Thermosets: A Promising Solution to Synchronously Improve Flame Retardancy, Mechanical Strength and Toughness

Cardanol-derived anhydride cross-linked epoxy thermosets with intrinsic anti-flammability, toughness and shape memory effect

Enhanced thermo‐mechanical properties of carbon fiber reinforced thermoresistant polymer, a blend of di‐functional epoxy bisphenol A and a tri‐functional epoxy Tactix 742

Investigation of the Properties of PBT/ABS-g-GMA Blends Modified with Epoxy Resin of Mid-Molecular Weights