Abstract:The influences of operating parameters on the gas-solid hydrodynamics of a 3-D spout-fluid bed operated in the flow regime of Jet-In-Fluidization are numerically investigated at the particle-scale level. The gas motion and solid motion are solved under the frameworks of computational fluid dynamics and discrete element method, respectively. The dynamical property of solid phase obtained numerically is compared with the experimental data in literature. Then, the influences of the spouting velocity, the background velocity and the particle diameter on the bed hydrodynamics are discussed. The results show that vigorously lateral motion of solid phase exists in the spout-annulus interface and the vertical transportation intensity is larger than the lateral one. Increasing the spouting velocity enlarges the solid velocity but decreases its concentration in the spout and enhances the solid circulating flux of the system. Meanwhile, the enlargement of background velocity gives rise to an obvious change of voidage in the annulus. However, enlarging the particle diameter lowers the solid motion in three regions of the bed. Spout and annulus interact with each other through the spout-annulus interface. The spout boundary diverges initially, and then keeps nearly constant, finally diverges again until the bed surface. Moreover, the shape of the spouting boundary is strongly influenced by the inlet geometry. Along the bed height, this influence diminishes initially but is enhanced in the vicinity of bed surface. The enlargement of spouting velocity or background velocity leads to the expansion of the spout boundary along the bed height. In contrast, the increase of particle diameter reduces the spout boundary. (C) 2014 Elsevier B.V. All rights reserved.

Experimental Study on Particles Spouting Characteristics in a Novel Annular Spouted Bed

Spoutable Bed Height and Pressure Fluctuation of a Novel Annular Spouted Bed with V-shaped Deflector

Spouting Regime and Spouting Characteristics of a Novel Annular Spouted Bed

Hydrodynamic Characteristics of a Novel Annular Spouted Bed with Multiple Air Nozzles

Experimental study on particles mixing in an annular spouted bed

Experimental Investigation of Bubble and Particle Motion Behaviors in A Gas-Solid Fluidized Bed with Side Wall Liquid Spray

Pressure Fluctuation Analysis for Annular Gas-Solid Spouted Bed Using Fine Particles

Mixing Characteristics of A Novel Annular Spouted Bed with Several Angled Air Nozzles

An Experimental Study on the Mixing Characteristics of Solids in an Annular Spouted Bed

Flow Patterns and Transitions of a Novel Annular Spouted Bed with Multiple Air Nozzles

Numerical Study on the Gas–Solid Flow in a Spouted Bed Installed with a Controllable Nozzle and a Swirling Flow Generator

Numerical Simulation of Gas/Solid Flow in a Novel Annular Spouted Bed with Multiple Gas Nozzles

Study on the Hydrodynamics of a Spouting−Moving Bed

Experimental Investigation on Gas-Solid Hydrodynamics of Coarse Particles in A Two-Dimensional Spouted Bed

Numerical and Experimental Study of Integral Multi-Jet Structure Impact on Gas-Solid Flow in a 3D Spout-Fluidized Bed

Influences of operating parameters on the hydrodynamics of a 3-D spout–fluid bed based on DEM modeling approach

Spouting Behaviors of Binary Mixtures of Cylindroid and Spherical Particles

A CFD-DEM study of a two-joint spouting flow pattern in a multiple rectangular spout fluidized bed

Hydrodynamic Behavior of a Three‐Phase Spouted Bed with Very Large Particles

CFD-DEM Simulation of High Density Particles Fluidization Behaviors in 3D Conical Spouted Beds

Study on the Effect of Horizontal Auxiliary Gas on the Flow Characteristics of Spouted Bed