Abstract:The gas-solid flow in a three-dimensional slot-rectangular spouted bed is numerically investigated under the parallel framework of the computational fluid dynamics-discrete element method coupling approach. The fluid phase is solved with the k-epsilon turbulence model at the computational grid level, while the solid phase is tracked individually with the discrete element method at the particle scale. Millions of particles are calculated using a total number of 112 CPUs in a cluster. The predicted pressure drop profiles and the minimum spouting velocities of the calculations under different bed heights agree well with the experimental data. The startup procedure and the solid flow pattern are identified. Then, wall effects on the distribution properties of the gas-solid hydrodynamics are explored. Moreover, the interaction between spout and annulus and the effects of the superficial velocity and bed height on the bed hydrodynamics are discussed. The results show that a larger pressure drop appears in the system with a higher bed height. A bubble with its shape influenced by the slot geometry is formed in the startup procedure. Moreover, the bed hydrodynamics show a strong 3-D behavior along the depth direction. Large vertical solid flux mainly concentrates in the central region of the spout. The spout-annulus interface is dramatically influenced by the slot shape and shows different evolutionary tendencies in the different directions, and this influence becomes weaker along the bed height. The larger the superficial velocity is, the higher the bed height and the larger the spouting height appear. Besides, solid flow patterns under different bed heights with the superficial velocity the same ratio to the corresponding minimum spouting velocity show a similar behavior.

A CFD-DEM study of a two-joint spouting flow pattern in a multiple rectangular spout fluidized bed

Numerical Simulation of Two-Dimensional Spouted Bed with Draft Plates by Discrete Element Method

Dynamic Modelling of Fluidisation in Gas-Solid Bubbling Fluidised Beds

Multi-scale Characteristics and Gas-Solid Interaction among Multiple Beds in a Dual Circulating Fluidized Bed Reactor System

Numerical Study of a Lab-Scale Double Slot-Rectangular Spouted Bed with the Parallel CFD–DEM Coupling Approach

Numerical Simulations Of Fluid Dynamics And Mixing In A Large Shallow Bubble Column: Effects Of The Sparging Pipe Allocations For Multiple-Pipe Gas Distributors

CFD simulation of effects of the configuration of gas distributors on gas–liquid flow and mixing in a bubble column

Three-Dimensional Modeling of Gas–Solid Motion in a Slot-Rectangular Spouted Bed with the Parallel Framework of the Computational Fluid Dynamics–Discrete Element Method Coupling Approach

Influences of operating parameters on the hydrodynamics of a 3-D spout–fluid bed based on DEM modeling approach

Parallel CFD–DEM Modeling of the Hydrodynamics in a Lab-Scale Double Slot-Rectangular Spouted Bed with a Partition Plate

Numerical Investigation of the Time-Related Properties of Solid Phase in a 3-D Spout-Fluid Bed

CFD‐DEM Simulation of the Spout–annulus Interaction in a 3D Spouted Bed with a Conical Base

Investigation of fluidization behavior of high density particle in spouted bed using CFD–DEM coupling method

Flow patterns of solids in a two-dimensional spouted bed with draft plates: PIV measurement and DEM simulations

CFD–DEM Study of Mixing and Dispersion Behaviors of Solid Phase in a Bubbling Fluidized Bed

Experimental Investigation on Gas-Solid Hydrodynamics of Coarse Particles in A Two-Dimensional Spouted Bed

Hydrodynamics and particles mixing in rectangular spouted bed with different base geometries using CFD-DEM

Super-quadric CFD-DEM study of spout deflection behaviour of non-spherical particles in a spout fluidized bed

Particle dispersion and circulation patterns in a 3D spouted bed with or without draft tube

Investigation of Gas-Solid Flow Dynamics and Heat Transfer in Fluidized Beds by Using DEM-LES Coupling Approach

CFD-DEM Simulation of Flow and Mixing Behavior in Downers with Different Entrance Structures