Abstract:The gas-solid flow in a three-dimensional slot-rectangular spouted bed is numerically investigated under the parallel framework of the computational fluid dynamics-discrete element method coupling approach. The fluid phase is solved with the k-epsilon turbulence model at the computational grid level, while the solid phase is tracked individually with the discrete element method at the particle scale. Millions of particles are calculated using a total number of 112 CPUs in a cluster. The predicted pressure drop profiles and the minimum spouting velocities of the calculations under different bed heights agree well with the experimental data. The startup procedure and the solid flow pattern are identified. Then, wall effects on the distribution properties of the gas-solid hydrodynamics are explored. Moreover, the interaction between spout and annulus and the effects of the superficial velocity and bed height on the bed hydrodynamics are discussed. The results show that a larger pressure drop appears in the system with a higher bed height. A bubble with its shape influenced by the slot geometry is formed in the startup procedure. Moreover, the bed hydrodynamics show a strong 3-D behavior along the depth direction. Large vertical solid flux mainly concentrates in the central region of the spout. The spout-annulus interface is dramatically influenced by the slot shape and shows different evolutionary tendencies in the different directions, and this influence becomes weaker along the bed height. The larger the superficial velocity is, the higher the bed height and the larger the spouting height appear. Besides, solid flow patterns under different bed heights with the superficial velocity the same ratio to the corresponding minimum spouting velocity show a similar behavior.

Flow patterns of solids in a two-dimensional spouted bed with draft plates: PIV measurement and DEM simulations

Numerical Simulation of Two-Dimensional Spouted Bed with Draft Plates by Discrete Element Method

Particle Velocity Measurements in Transition Section of Turbulent Fluidized Beds Using Optical Fiber Probe and CFD Simulation

Experimental Studies of Particle Flow Dynamics in A Two-Dimensional Spouted Bed

Characterization of Flow Pattern of Cohesive Particles in Gas-Solid Fluidized Bed Via Axial Distribution of Particle Motions

Investigation of Particle Flow Behaviors in a Simplified Downcomer of Multistage Fluidized Bed

DEM Simulation of the Particle Dynamics in Two-Dimensional Spouted Beds

Parallel CFD–DEM Modeling of the Hydrodynamics in a Lab-Scale Double Slot-Rectangular Spouted Bed with a Partition Plate

Experimental Investigation on Gas-Solid Hydrodynamics of Coarse Particles in A Two-Dimensional Spouted Bed

Particle dispersion and circulation patterns in a 3D spouted bed with or without draft tube

A CFD-DEM study of a two-joint spouting flow pattern in a multiple rectangular spout fluidized bed

Three-Dimensional Modeling of Gas–Solid Motion in a Slot-Rectangular Spouted Bed with the Parallel Framework of the Computational Fluid Dynamics–Discrete Element Method Coupling Approach

Influences of operating parameters on the hydrodynamics of a 3-D spout–fluid bed based on DEM modeling approach

Numerical Study of a Lab-Scale Double Slot-Rectangular Spouted Bed with the Parallel CFD–DEM Coupling Approach

Numerical Investigation of the Gas‐Solid Flow Characteristics in a Three‐Dimensional Spouted Bed with a Draft Tube

Numerical Investigation of the Time-Related Properties of Solid Phase in a 3-D Spout-Fluid Bed

Effects of Draft Tubes on Particle Velocity Profiles in Spouted Beds

Effect of Cohesion on Granular-Fluid Flows in Spouted Beds: PIV Measurement and DEM Simulations

Discrete Element Simulation of the Hydrodynamics in A 3d Spouted Bed: Influence of Tube Configuration

Numerical investigation of the particle flow behaviors in a fluidized-bed drum by CFD-DEM

Dem Simulation of Wet Granular-Fluid Flows in Spouted Beds: Numerical Studies and Experimental Verifications