Abstract:Solid concentration and particle velocity distributions in the transition section of a ϕ 200mm turbulent fluidized bed (TFB) and a ϕ 200mm annulus turbulent fluidized bed (A-TFB) with a ϕ 50mm central standpipe were measured using a PV6D optical probe. It is concluded that in turbulent regime, the axial distribution of solid concentration in A-TFB was similar to that in TFB, but the former had a shorter transition section. The axial solid concentration distribution, probability density, and power spectral distributions revealed that the standpipe hindered the turbulence of gas–solid two-phase flow at a low superficial gas velocity. Consequently, the bottom flow of A-TFB approached the bubbling fluidization pattern. By contrast, the standpipe facilitated the turbulence at a high superficial gas velocity, thus making the bottom flow of A-TFB approach the fast fluidization pattern. Both the particle velocity and solid concentration distribution presented a unimodal distribution in A-TFB and TFB. However, the standpipe at a high gas velocity and in the transition or dilute phase section significantly affected the radial distribution of flow parameters, presenting a bimodal distribution with particle concentration higher near the internal and external walls and in downward flow. Conversely, particle concentration in the middle annulus area was lower, and particles flowed upward. This result indicated that the standpipe destroyed the core-annular structure of TFB in the transition and dilute phase sections at a high gas velocity and also improved the particle distribution of TFB. In conclusion, the standpipe improved the fluidization quality and flow homogeneity at high gas velocity and in the transition or dilute phase section, but caused opposite phenomena at low gas velocity and in the dense-phase section.

Particle Velocity Measurements in Transition Section of Turbulent Fluidized Beds Using Optical Fiber Probe and CFD Simulation

Particle Decelerating Regions in Turbulent Fluidized Bed

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Solid Concentration and Velocity Distributions in an Annulus Turbulent Fluidized Bed

Investigation of Particle Flow Behaviors in a Simplified Downcomer of Multistage Fluidized Bed

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Monitoring of Particle Motions in Gas-Solid Fluidized Beds by Electrostatic Sensors

Visual Measurement of Particle Movement in Rectangular Circulating Fluidized Bed

Estimation of Particle Dispersion Characteristics in a Fluidized Bed with the Binary Mixture of Geldart A and B Types Using the Optical Fiber Probe Method

Experimental Study on the Bubble Rise Velocity in Three-Phase Circulating Fluidized Beds

Ldv Measurements of Particle Velocity Distribution and Annular Film Thickness in A Turbulent Fluidized Bed

Investigating particle phase velocity in a 3D spouted bed by a novel fiber high speed photography method

Experimental Investigation on Local Particle Volume Fractions Distribution in Offset-Exit Circulating Fluidized Bed

Experimental Research on Fluidized Bed Particle Velocity Field Measurement with Image Processing

Measurement of Particle Velocity in Spouted Bed Based on the Combination of Fiberscope and High-Speed Photography

Measurement method of particle phase motion parameter based on fiber high speed photography

Particle Velocity Distribution and Its Prediction in a 14 M Two-Dimensional Circulating Fluidized Bed Riser

Study on Void Behavior in a Turbulent Fluidized Bed with Catalyst Powders

Gas-solid velocity profiles and slip phenomenon in a cocurrent downflow circulating fluidized bed

Using Stereo XPTV to Determine Cylindrical Particle Distribution and Velocity in a Binary Fluidized Bed