Abstract:Solid concentration and particle velocity distributions in the transition section of a ϕ 200mm turbulent fluidized bed (TFB) and a ϕ 200mm annulus turbulent fluidized bed (A-TFB) with a ϕ 50mm central standpipe were measured using a PV6D optical probe. It is concluded that in turbulent regime, the axial distribution of solid concentration in A-TFB was similar to that in TFB, but the former had a shorter transition section. The axial solid concentration distribution, probability density, and power spectral distributions revealed that the standpipe hindered the turbulence of gas–solid two-phase flow at a low superficial gas velocity. Consequently, the bottom flow of A-TFB approached the bubbling fluidization pattern. By contrast, the standpipe facilitated the turbulence at a high superficial gas velocity, thus making the bottom flow of A-TFB approach the fast fluidization pattern. Both the particle velocity and solid concentration distribution presented a unimodal distribution in A-TFB and TFB. However, the standpipe at a high gas velocity and in the transition or dilute phase section significantly affected the radial distribution of flow parameters, presenting a bimodal distribution with particle concentration higher near the internal and external walls and in downward flow. Conversely, particle concentration in the middle annulus area was lower, and particles flowed upward. This result indicated that the standpipe destroyed the core-annular structure of TFB in the transition and dilute phase sections at a high gas velocity and also improved the particle distribution of TFB. In conclusion, the standpipe improved the fluidization quality and flow homogeneity at high gas velocity and in the transition or dilute phase section, but caused opposite phenomena at low gas velocity and in the dense-phase section.

Experimental Investigation on Local Particle Volume Fractions Distribution in Offset-Exit Circulating Fluidized Bed

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Particle Velocity Measurements in Transition Section of Turbulent Fluidized Beds Using Optical Fiber Probe and CFD Simulation

Solid Concentration and Velocity Distributions in an Annulus Turbulent Fluidized Bed

Multi-scale Characteristics and Gas-Solid Interaction among Multiple Beds in a Dual Circulating Fluidized Bed Reactor System

Experimental research on solids oscillation circulation behavior in circulating fluidized bed

CFD Simulation and Hydrodynamics Characterization of Solids Oscillation Behavior in a Circulating Fluidized Bed with Sweeping Bend Return

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Characterization of Flow Pattern of Cohesive Particles in Gas-Solid Fluidized Bed Via Axial Distribution of Particle Motions

Effect of Riser Geometry Structure on Local Flow Pattern in a Rectangular Circulating Fluidized Bed

Dynamic Characteristics of Solids Circulation Establishment in Laboratory and Industrial Circulating Fluidized Beds with Sweeping Bend Return

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

Visual Measurement of Particle Movement in Rectangular Circulating Fluidized Bed

Measurements on the Local Solids Concentration in the Lower Part of a Circulating Fluidized Bed Riser

Investigation of Unstable Solids Circulation Behavior in A Circulating Fluidized Bed with Sweeping Bend Return Using Pressure Frequency Analysis

Experimental Study of High-Density Gas–solids Flow in a New Coupled Circulating Fluidized Bed

Discrete Element Study of Solid Circulating and Resident Behaviors in an Internally Circulating Fluidized Bed

Effect of Exit Structure on the Particle Velocity Distribution in the Dilute Region of a Rectangular Circulating Fluidized Bed Riser

Experimental Study of the Effect of Internals on Optimizing Gas–solid Flow in a Circulating Fluidized Bed

Particle Residence Time Distribution in a Circulating Fluidized Bed