Abstract:Solid concentration and particle velocity distributions in the transition section of a ϕ 200mm turbulent fluidized bed (TFB) and a ϕ 200mm annulus turbulent fluidized bed (A-TFB) with a ϕ 50mm central standpipe were measured using a PV6D optical probe. It is concluded that in turbulent regime, the axial distribution of solid concentration in A-TFB was similar to that in TFB, but the former had a shorter transition section. The axial solid concentration distribution, probability density, and power spectral distributions revealed that the standpipe hindered the turbulence of gas–solid two-phase flow at a low superficial gas velocity. Consequently, the bottom flow of A-TFB approached the bubbling fluidization pattern. By contrast, the standpipe facilitated the turbulence at a high superficial gas velocity, thus making the bottom flow of A-TFB approach the fast fluidization pattern. Both the particle velocity and solid concentration distribution presented a unimodal distribution in A-TFB and TFB. However, the standpipe at a high gas velocity and in the transition or dilute phase section significantly affected the radial distribution of flow parameters, presenting a bimodal distribution with particle concentration higher near the internal and external walls and in downward flow. Conversely, particle concentration in the middle annulus area was lower, and particles flowed upward. This result indicated that the standpipe destroyed the core-annular structure of TFB in the transition and dilute phase sections at a high gas velocity and also improved the particle distribution of TFB. In conclusion, the standpipe improved the fluidization quality and flow homogeneity at high gas velocity and in the transition or dilute phase section, but caused opposite phenomena at low gas velocity and in the dense-phase section.

Experimental Study on the Bubble Rise Velocity in Three-Phase Circulating Fluidized Beds

Particle Velocity Measurements in Transition Section of Turbulent Fluidized Beds Using Optical Fiber Probe and CFD Simulation

Experimental study on bubble behavior in gas–liquid–solid three-phase circulating fluidized beds

Solid Concentration and Velocity Distributions in an Annulus Turbulent Fluidized Bed

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Experimental Study on Gas-Holdup and Gas-Liquid Interfacial Area in Tpcfbs

Multi-scale Characteristics and Gas-Solid Interaction among Multiple Beds in a Dual Circulating Fluidized Bed Reactor System

Bubble Characterization in the Gas-Solid Fluidized Bed Using an Intrusive Acoustic Emission Sensor Array

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Experimental Measurement and Theoretical Analysis on Bubble Dynamic Behaviors in a Gas-Liquid Bubble Column

Study on Void Behavior in a Turbulent Fluidized Bed with Catalyst Powders

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

Experimental research on solids oscillation circulation behavior in circulating fluidized bed

Experimental Investigation on Local Particle Volume Fractions Distribution in Offset-Exit Circulating Fluidized Bed

Revealing instantaneous gas-particle segregation in bubbling and turbulent fluidized beds through fiber optic sensing

Investigation of flow characteristics in a rectangular spouted fluidized bed using electrical capacitance volume tomography

Hydrodynamic Behavior of Three-Phase Airlift Loop Slurry Reactor

Study of a Novel Fluidized Bed Flotation Column with Enhanced Bubble Dispersion

Experimental study on gas–liquid interfacial area and mass transfer coefficient in three-phase circulating fluidized beds

Experimental Investigation on the Effect of Superficial Gas Velocity on Bubble Dynamics Properties of B Particles in Gas–solid Fluidized Bed Reactor Using Digital Image Analysis Technique

Experimental Measurement and Numerical Simulation for Liquid Flow Velocity and Local Phase Hold-Ups in the Riser of a GLSCFB