Abstract:The gas-solid flow in a three-dimensional slot-rectangular spouted bed is numerically investigated under the parallel framework of the computational fluid dynamics-discrete element method coupling approach. The fluid phase is solved with the k-epsilon turbulence model at the computational grid level, while the solid phase is tracked individually with the discrete element method at the particle scale. Millions of particles are calculated using a total number of 112 CPUs in a cluster. The predicted pressure drop profiles and the minimum spouting velocities of the calculations under different bed heights agree well with the experimental data. The startup procedure and the solid flow pattern are identified. Then, wall effects on the distribution properties of the gas-solid hydrodynamics are explored. Moreover, the interaction between spout and annulus and the effects of the superficial velocity and bed height on the bed hydrodynamics are discussed. The results show that a larger pressure drop appears in the system with a higher bed height. A bubble with its shape influenced by the slot geometry is formed in the startup procedure. Moreover, the bed hydrodynamics show a strong 3-D behavior along the depth direction. Large vertical solid flux mainly concentrates in the central region of the spout. The spout-annulus interface is dramatically influenced by the slot shape and shows different evolutionary tendencies in the different directions, and this influence becomes weaker along the bed height. The larger the superficial velocity is, the higher the bed height and the larger the spouting height appear. Besides, solid flow patterns under different bed heights with the superficial velocity the same ratio to the corresponding minimum spouting velocity show a similar behavior.

Investigation of fluidization behavior of high density particle in spouted bed using CFD–DEM coupling method

Characterization of Flow Pattern of Cohesive Particles in Gas-Solid Fluidized Bed Via Axial Distribution of Particle Motions

Numerical Simulation of Two-Dimensional Spouted Bed with Draft Plates by Discrete Element Method

CFD-DEM Simulation of High Density Particles Fluidization Behaviors in 3D Conical Spouted Beds

CFD Simulation of Hydrodynamic Characteristics in a Multiple-Spouted Bed

A CFD-DEM study of a two-joint spouting flow pattern in a multiple rectangular spout fluidized bed

Study on a Semi-Resolved CFD-DEM Method for Rod-Like Particles in a Gas-Solid Fluidized Bed

Numerical Study of a Lab-Scale Double Slot-Rectangular Spouted Bed with the Parallel CFD–DEM Coupling Approach

Experimental Investigation on Gas-Solid Hydrodynamics of Coarse Particles in A Two-Dimensional Spouted Bed

CFD–DEM–VDGM Method for Simulation of Particle Fluidization Behavior in Multi-Ring Inclined-Hole Spouted Fluidized Bed

Multi-scale simulation of particle density effects on hydrodynamics in dense gas-solid fluidized beds

Investigating the fluidization of disk-like particles in a fluidized bed using CFD-DEM simulation

CFD-DEM Investigation of the Fluidization of Binary Mixtures Containing Rod-Like Particles and Spherical Particles in a Fluidized Bed

Numerical Study of Particle Injection into a Gas-Solid Fluidized Bed

Three-Dimensional Modeling of Gas–Solid Motion in a Slot-Rectangular Spouted Bed with the Parallel Framework of the Computational Fluid Dynamics–Discrete Element Method Coupling Approach

CFD‐DEM Simulation of the Spout–annulus Interaction in a 3D Spouted Bed with a Conical Base

Numerical Investigation of the Time-Related Properties of Solid Phase in a 3-D Spout-Fluid Bed

Particle dispersion and circulation patterns in a 3D spouted bed with or without draft tube

Dem Simulation of Wet Granular-Fluid Flows in Spouted Beds: Numerical Studies and Experimental Verifications

Super-quadric CFD-DEM study of spout deflection behaviour of non-spherical particles in a spout fluidized bed

DEM Simulation of the Particle Dynamics in Two-Dimensional Spouted Beds