Abstract:The influences of operating parameters on the gas-solid hydrodynamics of a 3-D spout-fluid bed operated in the flow regime of Jet-In-Fluidization are numerically investigated at the particle-scale level. The gas motion and solid motion are solved under the frameworks of computational fluid dynamics and discrete element method, respectively. The dynamical property of solid phase obtained numerically is compared with the experimental data in literature. Then, the influences of the spouting velocity, the background velocity and the particle diameter on the bed hydrodynamics are discussed. The results show that vigorously lateral motion of solid phase exists in the spout-annulus interface and the vertical transportation intensity is larger than the lateral one. Increasing the spouting velocity enlarges the solid velocity but decreases its concentration in the spout and enhances the solid circulating flux of the system. Meanwhile, the enlargement of background velocity gives rise to an obvious change of voidage in the annulus. However, enlarging the particle diameter lowers the solid motion in three regions of the bed. Spout and annulus interact with each other through the spout-annulus interface. The spout boundary diverges initially, and then keeps nearly constant, finally diverges again until the bed surface. Moreover, the shape of the spouting boundary is strongly influenced by the inlet geometry. Along the bed height, this influence diminishes initially but is enhanced in the vicinity of bed surface. The enlargement of spouting velocity or background velocity leads to the expansion of the spout boundary along the bed height. In contrast, the increase of particle diameter reduces the spout boundary. (C) 2014 Elsevier B.V. All rights reserved.

Study on the Effect of Horizontal Auxiliary Gas on the Flow Characteristics of Spouted Bed

Study on Flow Characteristics of Spouting-Moving Bed

Study on the Hydrodynamics of a Spouting−Moving Bed

Experimental Investigation of Flow Development in Large-Scale Bubble Columns in the Churn-Turbulent Regime

Numerical Simulations Of Fluid Dynamics And Mixing In A Large Shallow Bubble Column: Effects Of The Sparging Pipe Allocations For Multiple-Pipe Gas Distributors

Numerical Study on the Gas–Solid Flow in a Spouted Bed Installed with a Controllable Nozzle and a Swirling Flow Generator

Experimental Study on Particles Spouting Characteristics in a Novel Annular Spouted Bed

Influences of operating parameters on the hydrodynamics of a 3-D spout–fluid bed based on DEM modeling approach

Numerical and Experimental Study of Integral Multi-Jet Structure Impact on Gas-Solid Flow in a 3D Spout-Fluidized Bed

Numerical Analysis of Gas-Solid Flow in a Novel Spouted Bed Structure under the Longitudinal Vortex Effects

Effect of Operating Parameters on Gas‐Solid Hydrodynamics and Heat Transfer in a Spouted Bed

Numerical Investigation of the Gas‐Solid Flow Characteristics in a Three‐Dimensional Spouted Bed with a Draft Tube

Study on Gas-Solid Flow Behaviors in A Spouted Bed at Elevated Pressure: Numerical Simulation Aspect

Spoutable Bed Height and Pressure Fluctuation of a Novel Annular Spouted Bed with V-shaped Deflector

Experimental Investigation on Hydrodynamic Behavior in a Spouted Bed with Longitudinal Vortex Generators

CFD Simulation of Hydrodynamic Characteristics in a Multiple-Spouted Bed

A CFD-DEM study of a two-joint spouting flow pattern in a multiple rectangular spout fluidized bed

Numerical Simulation of Gas-Solid Flow in a Novel Spouted Bed: Influence of Row Number of Longitudinal Vortex Generators

Experimental study on particles mixing in an annular spouted bed

Influence of Longitudinal Vortex Generator Configuration on the Hydrodynamics in a Novel Spouted Bed

An Experimental Study on the Mixing Characteristics of Solids in an Annular Spouted Bed