Abstract:Biomass fast pyrolysis fluidized bed reactor is regarded as one of the most promising technologies for high value utilization of biomass. In this work, one two-dimensional fluidized bed reactor model was established, coupling with multiphase CFD simulation method and pyrolysis reaction kinetics, and further verified by the experimental data. This work mainly investigated the effects of biomass inlet and nitrogen inlet modes on multi-process characteristics, such as flow behavior, heat transfer and pyrolysis reaction. The synergistic effects between the two inlet modes were further explored and thus would affect the three-phase pyrolysis product distribution. The results showed that the spatial particle distribution and temperature distribution in the dense phase zone were becoming more uniform and the tar yield increased when the biomass inlet mode changed from single nozzle to double nozzles jetting opposite. Besides, when the nitrogen nozzle number was set as one and the auxiliary gas velocity was set as 0.15 m/s, much larger local circulation formed in the dense phase zone, meanwhile the particle volume fraction and temperature became more evenly distributed, which was conducive to the biomass pyrolysis process. The nitrogen inlet mode was found to show a greater impact on the tar yield compared to the biomass inlet mode. For single gas inlet mode, one biomass nozzle should be preferred for lower auxiliary gas velocity and the opposite double nozzle would be better for higher auxiliary gas velocity. The synergistic effects between biomass and nitrogen inlet modes were further summarized, which were found to have a positive impact on the biomass pyrolysis reaction characteristics. Based on the above conclusions, this work could provide a feasible theoretical guidance for designing fluidized bed pyrolysis reactor and optimizing the biomass pyrolysis process.

Mixing Characteristics of A Novel Annular Spouted Bed with Several Angled Air Nozzles

Hydrodynamic Characteristics of a Novel Annular Spouted Bed with Multiple Air Nozzles

An Experimental Study on the Mixing Characteristics of Solids in an Annular Spouted Bed

Experimental study on particles mixing in an annular spouted bed

Numerical Simulation of Gas/Solid Flow in a Novel Annular Spouted Bed with Multiple Gas Nozzles

Experimental Study on Particles Spouting Characteristics in a Novel Annular Spouted Bed

Influence of Rotational Feeding on Mixing Behavior of Particles in Annular Spouted Beds

Distribution and Movement of Fine Particles Injected in a Gas–solid Fluidized Bed with Hydrocarbon Liquid Spray

Bubble Size “bimodal” Distribution Enhances Mixing and Mass Transfer in Slurry Bubbling Column Reactor

Spoutable Bed Height and Pressure Fluctuation of a Novel Annular Spouted Bed with V-shaped Deflector

Numerical Study on the Gas–Solid Flow in a Spouted Bed Installed with a Controllable Nozzle and a Swirling Flow Generator

Bubble Dynamics and Particle Orientation in a Binary Fluidized Bed Containing Spherocylinders and Spheres

Flow Patterns and Transitions of a Novel Annular Spouted Bed with Multiple Air Nozzles

Spouting Regime and Spouting Characteristics of a Novel Annular Spouted Bed

A CFD-DEM study of a two-joint spouting flow pattern in a multiple rectangular spout fluidized bed

CFD-DEM Simulation of High Density Particles Fluidization Behaviors in 3D Conical Spouted Beds

CFD-DEM Investigation of the Fluidization of Binary Mixtures Containing Rod-Like Particles and Spherical Particles in a Fluidized Bed

Numerical Simulation and Multi-Process Coupling Analysis for Biomass Pyrolysis Fluidized Bed Reactor Based on Synergistic Effects Between Biomass and Nitrogen Inlet Modes

Fluidization of coarse particles in gas–solid conical beds

Experimental and numerical investigations on the hydrodynamics of gas-solid fluidized bed with an inclined agitator

Optimizing injection modes and reactor shapes in gas-particle fluidized beds using a mesoscale CFD model