Abstract:<p>The effect of inclined agitation on the fluidization quality of a gas-solid fluidized bed is experimentally and numerically investigated. The pressure characteristics are characterized by the standard deviation of pressure drop and power spectra. The particle velocity, solid volume fraction and granular temperature distributions are investigated by numerical modeling. It is found that inclined agitation enhances the gross circulation of solid particles and enlarges the affect region of the agitator, improving the gas-solid fluidization quality. The increase in the agitation speed leads to higher frequency of collisions and more activity of particles, resulting in decreases of bubble sizes and a more homogeneous solid volume fraction distribution. Wide-blade agitator can also improve the fluidization performance.</p>

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: to study the influence of inclined stirrers on the fluidization quality of gas - solid fluidized beds. Specifically, through experimental and numerical simulation methods, the effects of vertical and inclined stirring on the fluidization behavior of gas - solid fluidized beds are explored. In particular, how factors such as stirring speed, stirrer structure, and stirring angle affect key parameters such as pressure fluctuations, particle velocity distribution, and solid volume fraction distribution in the fluidized bed, thereby improving the fluidization quality of the fluidized bed. The main research contents mentioned in the paper include: - **Pressure characteristics**: Analyze the change of pressure drop through standard deviation and power spectrum to evaluate the pressure fluctuation of the fluidized bed. - **Particle velocity, solid volume fraction and particle temperature distribution**: Use numerical simulation methods to study the changes of these parameters under different stirring conditions. - **Influence of stirring speed**: Increasing the stirring speed can lead to a higher collision frequency and more active particle movement, thereby reducing the bubble size and making the solid volume fraction distribution more uniform. - **Influence of stirrer structure**: The wide - blade stirrer can better improve the fluidization performance. - **Influence of stirring mode**: Compared with vertical stirring, inclined stirring can break bubbles more effectively, reduce pressure fluctuations, and improve the gas - solid fluidization quality. - **Influence of stirring angle**: When the stirring angle is 45°, the optimal gas - solid fluidization quality is obtained. Through these studies, the paper aims to provide theoretical basis and technical support for the design of more efficient gas - solid fluidized beds.

Experimental and numerical investigations on the hydrodynamics of gas-solid fluidized bed with an inclined agitator

Effect of Agitation on the Fluidization Behavior of a Gas–solid Fluidized Bed with a Frame Impeller

Numerical simulation of pressure fluctuation in gas-solids agitated fluidized bed

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

CFD Simulation of an Agitated Gas-Fluidized Bed: Effects of Particle–particle Restitution Coefficient on the Hydrodynamics

Experimental Investigation of Bubble and Particle Motion Behaviors in A Gas-Solid Fluidized Bed with Side Wall Liquid Spray

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Experimental Investigation of Electrostatic Effect on Particle Motions in Gas-Solid Fluidized Beds

Experimental and Modeling Investigation of Liquid-Induced Agglomeration in a Gas–Solid Fluidized Bed with Liquid Spray

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Particle Fluidization Characteristics and Transition in a Hot Gas-Solid Fluidized Bed with Liquid Injection

Gas bubble behaviors in a gas–solid fluidized bed with an arch agitator

Characterization of Flow Pattern of Cohesive Particles in Gas-Solid Fluidized Bed Via Axial Distribution of Particle Motions

A Volatile Spray Zone Model and Experimentation in a Gas-Solid Fluidized Bed with Liquid Injection

Investigating Agglomeration Behaviors in High Temperature Gas–Solid Fluidized Beds with Liquid Injection

Pressure fluctuation in gas-solid agitated fluidized bed

Numerical studies of gas-solid flow behaviors and wall wear in a swirling fluidized bed

A Numerical Study on Gas-Fluidized Beds of Wet Flexible Fibers

Numerical Study of Particle Injection into a Gas-Solid Fluidized Bed

Effects of Interparticle Forces on Fluidization Characteristics in Liquid-Containing and High-Temperature Fluidized Beds

Studies on the Fluidization Properties of Agitated Fluidized Bed