Abstract:Fluidized beds reactors with liquid bridge and solid bridge coupling actions have been widely used in industry and thus studies of particle agglomerations under such fluidization conditions are of great significance. This work proposed an experimental apparatus combining electro-magnetic induction heating system with fluidized bed to simulate the real conditions for particle reaction heat release and heat transfer in industrial polymerization fluidized bed reactors. The effects of liquid content on agglomeration behavior of wax/graphite composite particles under different fluidization gas temperatures, gas velocities and heating powers have been studied. Through a force balance analysis of particles with liquid bridge and solid bridge coupling actions, relative solid bridge force was taken as a key parameter to demonstrate the effects of solid bridge force and other forces on agglomerations. Results showed that as the relative solid bridge force varied in different ranges, the agglomeration mass presented three different variation trends with liquid increases, namely monotonic increasing, non-monotonic changing and monotonic decreasing, due to different dominating agglomerating mechanisms (liquid evaporation and liquid bridge) during fluidization. According to the results of this study, the proposed criterion based on relative solid bridge force can be used to guide the regulation and control of particle agglomerations in fluidization with liquid bridge and solid bridge coupling actions.

Experimental and Modeling Investigation of Liquid-Induced Agglomeration in a Gas–Solid Fluidized Bed with Liquid Spray

Particle Agglomeration and Control of Gas-Solid Fluidized Bed Reactor with Liquid Bridge and Solid Bridge Coupling Actions

Investigating Agglomeration Behaviors in High Temperature Gas–Solid Fluidized Beds with Liquid Injection

Experimental Investigation of Bubble and Particle Motion Behaviors in A Gas-Solid Fluidized Bed with Side Wall Liquid Spray

A Volatile Spray Zone Model and Experimentation in a Gas-Solid Fluidized Bed with Liquid Injection

Evolution and Fluidization Behaviors of Wet Agglomerates Based on Formation-Fragmentation Competition Mechanism

Particle Fluidization Characteristics and Transition in a Hot Gas-Solid Fluidized Bed with Liquid Injection

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Modeling Agglomeration Behavior in High Temperature Gas–Solid Fluidized Beds Via Monte Carlo Method

Dynamic and Steady-State Characterization of the Liquid Spray Zone in an Externally Heated Gas–Solid Fluidized Bed

Effect of Agitation on the Fluidization Behavior of a Gas–solid Fluidized Bed with a Frame Impeller

Research Progress in Numerical Models on Gas-Solid Fluidization of Cohesive Particles

Numerical simulation of pressure fluctuation in gas-solids agitated fluidized bed

Formation of Liquid and Solid Bridges under the Interactions Between Droplet-Polyethylene Particle Pairs

Hydrodynamics and Heat Transfer in a Fluidized Bed with Liquid Spray: Particle Color-Change Based Measurement and Modelling

Distribution and Movement of Fine Particles Injected in a Gas–solid Fluidized Bed with Hydrocarbon Liquid Spray

Experimental Investigation of Electrostatic Effect on Particle Motions in Gas-Solid Fluidized Beds

Effects of liquid action mechanisms on hydrodynamics in liquid-containing gas–solid fluidized bed reactor

Experimental Investigation of Particle Size Effect on Agglomeration Behaviors in Gas–Solid Fluidized Beds

Mass Transfer Characterization for Hydrocarbon Liquid–particle Collision Based on Sensitive Tracing of Fluorescent Probe

Dynamic Characteristics of the Volatile Cloudy Zone in a Gas–solid Fluidized Bed with Hydrocarbon Liquid Spray