Numerical studies of gas-solid flow behaviors and wall wear in a swirling fluidized bed

Qiang Wu,Shuai Wang,Kai Zhang,Yunhua Zhao,Yurong He

DOI: https://doi.org/10.1016/j.powtec.2021.04.083

IF: 5.64

2021-08-01

Powder Technology

Abstract:<p>A swirling gas-solid fluidized bed can effectively improve the fluidization quality and interphase heat transfer via the introduction of tangential gas flow. The Dense Discrete Phase Model (DDPM) is employed to investigate the gas-solid flow behaviors in a swirling gas-solid fluidized bed with the air plenum. In addition, the wall wear and particle mixing behaviors are also examined. The results demonstrate that various operation regimes appear with the increasing superficial velocity. The particles are prone to be centrifugally attached to the wall in the stable swirling regime and accompanied by strong elutriation. The decrease of central body height will reduce the bed pressure drop and swirling velocity. The increase of operation velocity is beneficial to particle mixing behaviors in a swirling bed with a lower central body.</p>

engineering, chemical

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to study the gas - solid flow behavior, wall wear and particle mixing characteristics in a swirling fluidized bed through numerical simulation. Specifically, the author used the Dense Discrete Phase Model (DDPM) to explore the gas - solid flow behavior in the swirling gas - solid fluidized bed with an air chamber, and further examined the wall wear and particle mixing behavior. The research aims to: 1. **Analyze gas - solid flow characteristics**: Through the DDPM model, study the gas - solid flow characteristics in the swirling fluidized bed under different operating parameters, especially the change of operating modes at different apparent velocities. 2. **Evaluate wall wear**: Use the Oka wear model to evaluate the wall wear in the swirling fluidized bed and explore the influence of different operating conditions on wall wear. 3. **Study particle mixing behavior**: Analyze the mixing characteristics of particles in the swirling fluidized bed, especially the particle mixing effect at different central body heights. The main purpose of the paper is to provide theoretical basis and technical support for the design and operation of the swirling fluidized bed through these studies, especially in terms of reducing wall wear and improving particle mixing efficiency.

Numerical studies of gas-solid flow behaviors and wall wear in a swirling fluidized bed

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Numerical simulation of pressure fluctuation in gas-solids agitated fluidized bed

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Experimental Investigation of Bubble and Particle Motion Behaviors in A Gas-Solid Fluidized Bed with Side Wall Liquid Spray

Characterization of Flow Pattern of Cohesive Particles in Gas-Solid Fluidized Bed Via Axial Distribution of Particle Motions

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

Experimental Investigation of Electrostatic Effect on Particle Motions in Gas-Solid Fluidized Beds

Particle Fluidization Characteristics and Transition in a Hot Gas-Solid Fluidized Bed with Liquid Injection

Numerical Study of Particle Injection into a Gas-Solid Fluidized Bed

Numerical investigation of the particle flow behaviors in a fluidized-bed drum by CFD-DEM

Effect of Bed Thickness on a Pseudo 2D Gas-Solid Fluidized Bed Turbulent Flow Structures and Dynamics

Bubble Dynamics and Particle Orientation in a Binary Fluidized Bed Containing Spherocylinders and Spheres

Effects of Interparticle Forces on Fluidization Characteristics in Liquid-Containing and High-Temperature Fluidized Beds

A Numerical Study on Gas-Fluidized Beds of Wet Flexible Fibers

Analysis of Gas-Solid Flow Characteristics in a Spouted Fluidized Bed Dryer by Means of Computational Particle Fluid Dynamics

Experimental and numerical investigations on the hydrodynamics of gas-solid fluidized bed with an inclined agitator

Solids mass flux and mean dynamic solids hold-up in the packed section of the gas-solid-solid circulating fluidized bed

Three-Dimensional Modeling of Gas–Solid Motion in a Slot-Rectangular Spouted Bed with the Parallel Framework of the Computational Fluid Dynamics–Discrete Element Method Coupling Approach

Effect of Operating Parameters on Gas‐Solid Hydrodynamics and Heat Transfer in a Spouted Bed