Abstract:The gas-solid flow in a three-dimensional slot-rectangular spouted bed is numerically investigated under the parallel framework of the computational fluid dynamics-discrete element method coupling approach. The fluid phase is solved with the k-epsilon turbulence model at the computational grid level, while the solid phase is tracked individually with the discrete element method at the particle scale. Millions of particles are calculated using a total number of 112 CPUs in a cluster. The predicted pressure drop profiles and the minimum spouting velocities of the calculations under different bed heights agree well with the experimental data. The startup procedure and the solid flow pattern are identified. Then, wall effects on the distribution properties of the gas-solid hydrodynamics are explored. Moreover, the interaction between spout and annulus and the effects of the superficial velocity and bed height on the bed hydrodynamics are discussed. The results show that a larger pressure drop appears in the system with a higher bed height. A bubble with its shape influenced by the slot geometry is formed in the startup procedure. Moreover, the bed hydrodynamics show a strong 3-D behavior along the depth direction. Large vertical solid flux mainly concentrates in the central region of the spout. The spout-annulus interface is dramatically influenced by the slot shape and shows different evolutionary tendencies in the different directions, and this influence becomes weaker along the bed height. The larger the superficial velocity is, the higher the bed height and the larger the spouting height appear. Besides, solid flow patterns under different bed heights with the superficial velocity the same ratio to the corresponding minimum spouting velocity show a similar behavior.

Numerical Simulation of Gas/Solid Flow in a Novel Annular Spouted Bed with Multiple Gas Nozzles

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Novel Bubble–Emulsion Hydrodynamic Model for Gas–Solid Bubbling Fluidized Beds

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

Three-dimensional Simulation of Gas/Solid Flow in Spout-fluid Beds with Kinetic Theory of Granular Flow

Hydrodynamic Characteristics of a Novel Annular Spouted Bed with Multiple Air Nozzles

Numerical Study on the Gas–Solid Flow in a Spouted Bed Installed with a Controllable Nozzle and a Swirling Flow Generator

Numerical Simulation Of The Gas-Particle Flow Behavior In Oil Shale Semi-Coke Spouted Bed

Numerical Simulation of Two-Dimensional Spouted Bed with Draft Plates by Discrete Element Method

Numerical Simulation of Gas-Solid Flow in a Novel Spouted Bed: Influence of Row Number of Longitudinal Vortex Generators

Numerical Investigation of the Gas‐Solid Flow Characteristics in a Three‐Dimensional Spouted Bed with a Draft Tube

DEM Simulation of Gas–solid Flow Behaviors in Spout-Fluid Bed

The Numerical Method for Simulations Gas Solid Fluidization System

Three-Dimensional Modeling of Gas–Solid Motion in a Slot-Rectangular Spouted Bed with the Parallel Framework of the Computational Fluid Dynamics–Discrete Element Method Coupling Approach

An Experimental Study on the Mixing Characteristics of Solids in an Annular Spouted Bed

Simulation of Gas-Solid Flow Characteristics in Three-Dimensional Rotational Spouted-Fluidized Bed

Numerical Simulation Of The Gas-Solid Flow In A Square Circulating Fluidized Bed With Secondary Air Injection

Numerical Investigation of Gas–solid Flow Behavior in a Novel Integral Multi-Jet Spout-Fluidized Bed

Numerical Simulation of the Gas–solid Flow in a Bed with Lateral Gas Blasting

Numerical Analysis of Gas-Solid Flow in a Novel Spouted Bed Structure under the Longitudinal Vortex Effects

Numerical Simulation and Optimization of Hydrodynamics in a Novel Integral Multi-Jet Spout-Fluidized Bed