Abstract:Abstract Model updating using multiple test data is usually a challenging task for frictional structures. The difficulty arises from the limitations of nonlinear models which often overlook the uncertainties inherent in contact interfaces and in actual test conditions. In this paper, we present a parametric study for the model calibration process of a friction-damped turbine blade, addressing the experimentally measured response variability in computational simulations. On the experimental side, a recently developed test setup imitating a turbomachinery application with mid-span dampers is used. This setup allows measuring multiple responses and contact forces under nominally identical macroscale conditions. On the computational side, the same system is modeled in a commercial finite element software, and nonlinear vibration analyses are performed with a specifically developed in-house code. In numerical simulations, the multivalued nature of Coulomb’s law, which stems from the inherent variability range of static friction forces in permanently sticking contacts, is considered to be the main uncertainty. As the system undergoes vibration, this uncertainty propagates into the dynamic behavior, particularly under conditions of partial slip in contacts, thus resulting in response variability. A deterministic approach based on an optimization algorithm is pursued to predict the limits of the variability range. The model is iteratively calibrated to investigate the sensitivity of response limits to contact parameters and assembly misalignment. Through several iterations, we demonstrate how uncertain initial contact conditions can be numerically incorporated into dynamic analyses of friction-damped turbine blades. The results show a satisfactory level of accuracy between experiments and computational simulations. This work offers valuable insights for understanding what influences test rig response and provides practical solutions for numerical simulations to improve agreement with experimental results.

Measurement of Flapping-parameters and Calibration of Position-parameters for Standard Rotor Blade

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

A Novel Method for Angular Vibration Calibration Based on a Retroreflection Film Laser Interferometer and a Rotary Encoder

Flight Test System for Measuring the Aerodynamic Parameters of Rotor Blades

Study on Calibration Method and System Error Compensation of Balancing Machines

A High-Frequency Angular Vibration Calibration System Based on Phase Modulated Laser Interferometer Technique

Calibrate the Non-Orthogonal Error of AFM with Two-Dimensional Self-Traceable Grating.

Calibration of a Multi-Beam LIDAR by Using Linear Instrumental Error Model

Laser Dynamic Testing System of Helicopter Rotor Blade Flap and Lag Angles

Blade dynamics measurement for micro helicopter using laser

An Optoelectronic System For The In-Flight Measurement Of Helicopter Rotor Blades Motions And Strains

A new calibration method between an optical sensor and a rotating platform in turbine blade inspection

A dynamic turbine tip clearance measurement method based on laser self-mixing interferometric ranging considering Doppler effect

Experimental Studies For Micro Helicopter Blade Dynamics

3D Shape Measurement of Aeroengine Blade Based on Fringe Projection Profilometer Improved by Multi-Layer Concentric Ring Calibration

Distance Measurement of Contra-Rotating Rotor Blades with Ultrasonic Transducers

A novel rotor dynamic balancing method based on blade tip clearance measurement without the once per revolution sensor

A Calibration Scheme With Combination of the Optical Shaft Encoder and Laser Triangulation Sensor for Low-Frequency Angular Acceleration Rotary Table

Laser and vision-based measurements of helicopter blade angles

Fringe Projection Profilometry for Three-Dimensional Measurement of Aerospace Blades

Parametric study for model calibration of a friction-damped turbine blade with multiple test data