Abstract:Tip clearance refers to the radial distance from the tip of the engine rotor to the shroud, which significantly affects engine performance, as well as safety. The difference between the thermal and mechanical response of the components generates the "pinch point" clearance in the transient process, which is difficult to predict. This paper summarized a multidimensional transient model (MDTM) for clearance prediction, which was based on the temporal and spatial characteristics of components and verified by the fluid-solid-thermal coupling method (FSTM) on a single-stage turbine, and the computation cost of MDTM is only 1/1500 of FSTM. Therefore, MDTM is efficient for predicting tip clearance, especially in the early engine design stage. Meanwhile, the variant effects of different control strategies on the transient tip clearance of a baseline were explored through the approach. The control strategies consist of active clearance control methods, including controlling the cooling flow to the disk cavity and shaft speed variation time; and passive control methods, including the material type selection and geometry characteristic design. The pinch point and cruise clearance were controlled through different control strategies. Specifically, the material properties show the most significant effect on the cruise clearance (2.0% of the blade height), followed by the geometry characteristics (0.7% of the blade height). Meanwhile, the structural strength and temperature tolerance requirements should be considered first. Moreover, the mass flow rate control of the cooling flow to the disk cavity could be a potential method for tip clearance control, which affects the second pinch point and cruise clearance for 0.5% and 0.6% of the blade height, respectively. The study provides a theoretical basis for selecting a tip clearance control strategy.

A dynamic turbine tip clearance measurement method based on laser self-mixing interferometric ranging considering Doppler effect

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

Dynamic and high-speed measurement system for blade tip clearance of engine with optical comb

An Improved Key-Phase-Free Blade Tip-Timing Technique for Nonstationary Test Conditions and Its Application on Large-Scale Centrifugal Compressor Blades

Research on Tip Clearance Measurement Technology of Aero-engine Blade Based on Optical Fiber Sensing System

Novel Rotor Effective Wind Speed Estimation Method for Light Detection and Ranging Application

Distance Measurement of Contra-Rotating Rotor Blades with Ultrasonic Transducers

Numerical Investigation on the Influence of Turbine Rotor Parameters on the Eddy Current Sensor for the Dynamic Blade Tip Clearance Measurement

High-precision dynamic axial clearance measurement method based on an all-fiber heterodyne microwave-AMCW with an all-phase tracking algorithm

Dynamic Confocal Optical Probe Based on Time Difference Measurement

Dynamic Detection Method for Blade Tip Clearance of Aero-Engine in Assembled State Based on Linear Structured Light

A new calibration method between an optical sensor and a rotating platform in turbine blade inspection

A method of in-situ monitoring multiple parameters and blade condition of turbomachinery by using a single acoustic pressure sensor

A Machine Vision Method for Identifying Blade Tip Clearance in Wind Turbines

Active Control System of Turbine Tip Clearance

A Comprehensive Study of Tip Clearance Control Based on a Multidimensional Transient Clearance Prediction Approach

Simultaneous Measurement of Blade Tip Clearance and Blade Tip Timing With Microwave Sensor

A Blade Tip Timing Method Based on a Microwave Sensor

A novel rotor dynamic balancing method based on blade tip clearance measurement without the once per revolution sensor

Measurement and control method of clearance between wind turbine tower and blade-tip based on millimeter-wave radar sensor

Techniques for blade tip clearance measurements with capacitive probes