Abstract:Tip clearance refers to the radial distance from the tip of the engine rotor to the shroud, which significantly affects engine performance, as well as safety. The difference between the thermal and mechanical response of the components generates the "pinch point" clearance in the transient process, which is difficult to predict. This paper summarized a multidimensional transient model (MDTM) for clearance prediction, which was based on the temporal and spatial characteristics of components and verified by the fluid-solid-thermal coupling method (FSTM) on a single-stage turbine, and the computation cost of MDTM is only 1/1500 of FSTM. Therefore, MDTM is efficient for predicting tip clearance, especially in the early engine design stage. Meanwhile, the variant effects of different control strategies on the transient tip clearance of a baseline were explored through the approach. The control strategies consist of active clearance control methods, including controlling the cooling flow to the disk cavity and shaft speed variation time; and passive control methods, including the material type selection and geometry characteristic design. The pinch point and cruise clearance were controlled through different control strategies. Specifically, the material properties show the most significant effect on the cruise clearance (2.0% of the blade height), followed by the geometry characteristics (0.7% of the blade height). Meanwhile, the structural strength and temperature tolerance requirements should be considered first. Moreover, the mass flow rate control of the cooling flow to the disk cavity could be a potential method for tip clearance control, which affects the second pinch point and cruise clearance for 0.5% and 0.6% of the blade height, respectively. The study provides a theoretical basis for selecting a tip clearance control strategy.

Measurement and control method of clearance between wind turbine tower and blade-tip based on millimeter-wave radar sensor

A Machine Vision Method for Identifying Blade Tip Clearance in Wind Turbines

A Circularly Polarized Millimeter Wave Radar for Wind Turbine Sensing

A dynamic turbine tip clearance measurement method based on laser self-mixing interferometric ranging considering Doppler effect

An Integrated Measurement Method of Blade Tip Clearance and Blade Vibration Based on Blade Tip Timing Technology

Simultaneous Measurement of Blade Tip Clearance and Blade Tip Timing With Microwave Sensor

Active Control System of Turbine Tip Clearance

Incremental Feedforward Collective Pitch Control Method for Wind Turbines

Adaptive Dual-layer Sliding Mode Control for Wind Turbines with Estimated Wind Speed

Research on Tip Clearance Measurement Technology of Aero-engine Blade Based on Optical Fiber Sensing System

Novel Rotor Effective Wind Speed Estimation Method for Light Detection and Ranging Application

Research on Active Disturbance Rejection Control Method for Turbine Blade Tip Clearance

Research on Wingtip Distance Measurement of High-Speed Coaxial Helicopter Based on 77 GHz FMCW Millimeter-Wave Radar

Adaptive Continuous Neural Pitch Angle Control for Variable‐Speed Wind Turbines

A Comprehensive Study of Tip Clearance Control Based on a Multidimensional Transient Clearance Prediction Approach

A review of blade tip clearance–measuring technologies for gas turbine engines

Distance Measurement of Contra-Rotating Rotor Blades with Ultrasonic Transducers

Rapid Method to Measure Turbine Blade Based on Laser Sensor

Turbine Blade Three-Wavelength Radiation Temperature Measurement Method Based on Reflection Error Correction

High-precision dynamic axial clearance measurement method based on an all-fiber heterodyne microwave-AMCW with an all-phase tracking algorithm

Noise Measurement of a Wind Turbine using Thick Blades with Blunt Trailing Edge