Abstract:The clearance measurement environment of engine and gas turbine is harsh due to the high temperature, high pressure, and strong vibration. In such a measurement environment, the low-coherence heterodyne interferometric clearance measurement technique faces the problem of weak signal and the limited measurement range caused by the low Signal-to-Noise Ratio (SNR). To address this problem, a method using differential detection is proposed to enhance the SNR. The theoretical measurement model of the proposed method is strictly established, and the model indicates the method has the advantages of improving the SNR and expanding the measurement range. To prove the feasibility of the method, an all-fiber clearance measurement experimental verification system is built, and a comparison experiment between single-ended detection and differential detection is carried out. The experiment result shows that, under the same measurement conditions, the differential detection method improves the SNR by 4.22 times and increases the measurement range from 10 mm to 20 mm. Furthermore, the measurement uncertainty of the system is analyzed. It is theoretically and experimentally found that, due to the scanning speed instability of the optical fiber delay device, the measurement uncertainty increases with the increase of the clearance. But But within 20 mm , the measurement uncertainty is less than 15 mu m.

High-precision dynamic axial clearance measurement method based on an all-fiber heterodyne microwave-AMCW with an all-phase tracking algorithm

Axial clearance measurement method based on wavelength division multiplexing with all-fiber microwave photonic mixing

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

Demodulation Algorithm of Low Coherent Heterodyne Interference Signal for Axial Clearance Measurement of Rotating Machinery

Fast Algorithm of Single Frequency-Swept Interferometry for the Dynamic Axial Clearance Measurement of High-Speed Rotating Machinery.

Low Noisy Dual Wavelength Digital Holography and Application in the Ultra-precision Machining Surface Measurement

Algorithm of Doppler Error Suppression in Frequency-Swept Interferometry for the Dynamic Axial Clearance Measurement of High-Speed Rotating Machinery

Rotor-Stator Axial Clearance Measurement Technique of Engine Based on Frequency-Swept Interferometry

Axial clearance measurement method based on time-frequency analysis for high-speed targets in narrow spaces

Research on Tip Clearance Measurement Technology of Aero-engine Blade Based on Optical Fiber Sensing System

A Novel Method For The Micro-Clearance Measurement Of A Precision Spherical Joint Based On A Spherical Differential Capacitive Sensor

A dynamic turbine tip clearance measurement method based on laser self-mixing interferometric ranging considering Doppler effect

Dynamic Clearance Measurement Using Fiber-Optic Frequency-Swept and Frequency-Fixed Interferometry

Correlation-Changed-EMD Algorithm for Single Frequency-Sweep Interferometry Signal of High-Speed Rotating Structure Clearance Measurement

Turbine Blade Tip Clearance Measurements Using Skewed Dual Optical Beams of Tip Timing

Dynamic Compliance of Measuring Device for Force on High-speed Rotors

Low-coherence Heterodyne Interference Clearance Measurement Technology Based on Differential Detection

Transmission and measurement characteristics evaluation of surface acoustic wave sensor on rotating spindle in machine tools

Dynamic and high-speed measurement system for blade tip clearance of engine with optical comb

Measurement of Axial Dynamic Clearance in Scroll Compressor

Experimental Study on the Feasibility of Axial Clearance Measurement in Scroll Compressor Using Eddy Current Method