Abstract:The geometric parameters of aircraft engine blades need to be precisely measured to ensure the quality of the blades for the normal operation of aircraft engines. This study aims to address the challenges of existing measurement systems in balancing efficiency, accuracy, and completeness. Additionally, it aims to enhance the accuracy and robustness of the algorithm for extracting blade profile characteristic parameters. In this paper, a spectral confocal sensor is employed to establish a blade profile measurement system. The design includes a probe sampling strategy, and a standard ball is used to calibrate the sensor probe's light emission direction and the precise rotation center of the turntable. The paper proposes the use of methods such as partition search algorithm, binary search, and curvature segmentation to process point cloud data of blade body and tenon. We have conducted experimental measurements on the blades of an aircraft engine. The acquired three-dimensional point cloud data of multiple sets of blade cross-sections and dovetail sections were processed. After calculation, the maximum measurement errors for chord length, maximum blade thickness, tenon width, bottom height, top angle, and bottom angle are -0.0036mm, -0.00721mm, -0.0102mm, -0.00928mm, 0.0086 °, and -0.0058 °, respectively. This process validates the effectiveness of the proposed method and has high measurement accuracy. Compared with the CMM method, this method is more accurate in measuring small pits and large curvature micro surfaces, with higher measurement integrity and higher measurement efficiency.

Research on Tip Clearance Measurement Technology of Aero-engine Blade Based on Optical Fiber Sensing System

Research on high-speed and non-contact angle detection based on laser measurement

Dynamic and high-speed measurement system for blade tip clearance of engine with optical comb

Performance Comparison of Three Fibre-Based Reflective Optical Sensors for Aero Engine Monitorization

Near Common-Path Optical Fiber Interferometer for Potentially Fast On-Line Microscale-Nanoscale Surface Measurement

A dynamic turbine tip clearance measurement method based on laser self-mixing interferometric ranging considering Doppler effect

Design and optimization of a new type of contactless radial C4D sensor

High-precision dynamic axial clearance measurement method based on an all-fiber heterodyne microwave-AMCW with an all-phase tracking algorithm

Dynamic Detection Method for Blade Tip Clearance of Aero-Engine in Assembled State Based on Linear Structured Light

Measuring the Profile of Aircraft Engine Blades Using Spectral Confocal Sensors

System design and experimental research on tip clearance measurement of areo-engines by digital radiograph

A Microwave Sensor for Real-Time Online Monitoring and Measuring the Blade Tip Clearance of Aero-Engine

An Optoelectronic System For The In-Flight Measurement Of Helicopter Rotor Blades Motions And Strains

Research on Measurement of On-Line Laster Coaxality Error for Rotary Parts

A new calibration method between an optical sensor and a rotating platform in turbine blade inspection

Transmission and measurement characteristics evaluation of surface acoustic wave sensor on rotating spindle in machine tools

Techniques for blade tip clearance measurements with capacitive probes

Structural Health Monitoring of Wind Turbine Blade Using Fiber Bragg Grating Sensors and Fiber Optic Rotary Joint

A Blade Tip Timing Method Based on a Microwave Sensor

Advances in the application of non-contact temperature measurement technology for aero-engine blade.

Dynamic Confocal Optical Probe Based on Time Difference Measurement