Abstract:Blade tip clearance (BTC) measurement and active clearance control (ACC) have been and continue to be a fundamental concern in turbomachinery, which are closely bound up with the efficiency and reliability. This paper addresses the BTC measurement and ACC experimental study based on eddy current pulse-trigger method (ECPTM). And the implementation of ACC by axial displacement of the blisk is novel and this paper is the first to present the technique. The purpose of this paper is three fold. The first portion of this paper addresses the BTC measurement in different rotating speeds based on the larger scale rig, where a high-bandwidth (100 kHz) eddy current sensor (HECS) is employed. The results show that the relative errors of BTC values are not much bigger than 20%. The result indicates that ECPTM is more generally applicable in the condition where the eddy current sensor (ECS) is insufficient sampling caused by the limit of narrow bandwidth, especially under the high linear velocity condition. The second portion of this paper describes the ACC system where an electro-hydraulic proportional position control system (EHPPCS) is employed as the actuator. EHPPCS has the advantages of small size, fast response, resistance to load stiffness, large output and simple operation, which is widely applicable to the automatic control system of industrial power. This system optimizes the geometry shapes of casing and the blade tips to create a linear relationship of BTC values related to the axial displacement of the rotor. The BTC values can be transferred into axial displacement of the rotor, and then a voltage/current-BTC values characteristic can be obtained by employing EHPPCS in different rotating speeds. Unfortunately, one of the core components of EHPPCS is an overflow valve with a non-linear and time-variable voltage/current-pressure characteristic. Besides, the pressure-axial displacement characteristic of tilting pad thrust bearing is also non-linear. All those non-linear characteristics make it unsatisfactory to use the conventional PID control algorithm to achieve effective control of the system, which cause many difficulties in controlling of axial displacement of the rotor. So the last portion of this paper is the experimental study on ACC based on the above system by adopting sliding mode adaptive control of nonlinear system (SMACNS). The BTC values have been obtained under different outlet pressures by changing the current in different rotating speeds. The results indicate that this approach has nice robustness and smooth controlled quantity, and can overcome the difficulty caused by nonlinearity, parameter uncertainty and load disturbance. And then, the precision verification and error analysis are made. However, this work is a proof-of-concept demonstration using a laboratory setup providing the basis for BTC active control and blade health monitoring (BHM) based on ECS.

Active Control System of Turbine Tip Clearance

A Comprehensive Study of Tip Clearance Control Based on a Multidimensional Transient Clearance Prediction Approach

Calculation and Analysis for Transient Blade-Tip Radial Running Clearance of HPT

Dynamic blade tip clearance control of aero-engine by the integration of cooling air with fuel thermal management system

Vortex structure control based bleed in axial compressor cascade with tip clearance using large eddy simulation

Research on Active Disturbance Rejection Control Method for Turbine Blade Tip Clearance

Nonlinear and Dynamic Analysis of HPT Blade-tip Radial Running Clearance

Transient Tip Clearance Prediction Model Considering Transient Radial Temperature Distribution of Discs in a Gas Turbine Engine

Numerical Study of Porous Tip Treatment in Suppressing Tip Clearance Vortices in Cavitating Flow

A tip clearance prediction model for multistage rotors and stators in aero-engines

Investigation on the Turbine Blade Tip Clearance Measurement and Active Clearance Control Based on Eddy Current Pulse-Trigger Method

REVIEW OF ACTIVE CLEARANCE CONTROL SYSTEMS USED IN AIRCRAFT ENGINE BUILDING. DIRECTIONS AND DEVELOPMENT PROSPECTS

Numerical investigation on the influence of nonuniform tip clearance on rotor tip-clearance flow field structure

Comparisons of blade tip phantom cooling effectiveness for two tip structures with three tip clearances

Unsteady Analysis on the Effects of Tip Clearance Height on Hot Streak Migration Across Rotor Blade Tip Clearance

Reliability and Sensitivity Analyses of HPT Blade-Tip Radial Running Clearance Using Multiply Response Surface Model

The Study Of Tip Clearance Of A Wide-Chord Fan Blade Of A High Bypass Ratio Turbo-Fan Engine

A Review of Tip Clearance in Propeller, Pump and Turbine

Investigations on the aerothermal performance of the turbine blade winglet squealer tip within an uncertainty framework

A New Integrated Model for Simulating Adaptive Cycle Engine Performance Considering Variations in Tip Clearance

A dynamic turbine tip clearance measurement method based on laser self-mixing interferometric ranging considering Doppler effect