Abstract:Ultra-thin silicon slicing technology plays a critical role in achieving high-efficiency and low-cost solar cells in the photovoltaic (PV) industry. However, the surface phase evolution of silicon wafers under an ultra-thin slicing process and resulting etching behavior remains unclear. In this study, the surface phase evolution of different surface thicknesses of silicon wafers was carefully studied. As the thickness of silicon wafers became relatively thin, the degree of surface stress-induced amorphous silicon (ST-α-Si) significantly increased. Moreover, the UPS test showed that the ST-α-Si layer had an orbital energy level relatively lower than that in monocrystalline silicon, thereby having lower reduction performance during metal-assisted chemical etching (MACE). A copper deposition experiment was conducted to study the etching hindering effect caused by silicon surface ST-α-Si phases. The result showed that the presence of ST-α-Si adversely affected copper deposition. To improve the MACE uniformity, a pretreatment involving the use of HF/H 2 O 2 mixed solution to remove the surface ST-α-Si layer was investigated. After HF/H 2 O 2 pretreatment, the uniformity of inverted pyramids formed through MACE on the silicon wafer surface was significantly improved. Moreover, the reflectance of the MACE-textured surface was reduced to 7.67% from 10.1% compared with that without pretreatment. Therefore, this study provides reference guidelines and useful approaches for preparing uniform inverted pyramid surfaces using MACE in ultra-thin silicon wafers.

The Study on the Morphology Control of Silicon Etching by ICP

Isotropic Etch for SiO2 Microcantilever Release with ICP System

Effects of deep reactive ion etching parameters on etching rate and surface morphology in extremely deep silicon etch process with high aspect ratio

Study of the Nanometer Scale Polysilicon Micro Structure Etching

REACTION SIMULATION AND EXPERIMENT OF A Cl2/Ar INDUCTIVELY COUPLED PLASMA FOR ETCHING OF SILICON

Trench Profile Control of Silicon DRIE Process on ICP Tools

Microscale pattern etch of 4H–SiC by inductively coupled plasma

A process study of electron beam nano-lithography and deep etching with an ICP system

ICP vs CCP in High Aspect Ratio Etching of SiO2 using Ar/C4F8/O2 Gas Mixtures

Etching Characteristics of PECVD SiC

Study on ICP Dry Etching Technology for Nanostructure Photonic Device Fabrication

Toward Controllable Wet Etching of Monocrystalline Silicon: Roles of Mechanically Driven Defects

Optimization of Etching Processes for the Fabrication of Smooth Silicon Carbide Membranes for Applications in Quantum Technology

Research on Silicon Wafer Surface Phase under the Ultra-thin Slicing Process and Its Etching Hindrance Behavior during Metal-Assisted Chemical Etching

High Aspect Ratio Si Etching Technique and Application

Parametric Study, Modeling of Etching Process and Application for Tapered Through-Silicon-via

High Aspect Ratio Carbon Hard Mask Etch Process for Profile and LCDU Control

Surface Morphology Evolution during Chemical Mechanical Polishing Based on Microscale Material Removal Modeling for Monocrystalline Silicon

Mechanisms for plasma etching of RRAM SiO2 with diblock copolymer selectivity

Critical tasks in high aspect ratio silicon dry etching for microelectromechanical systems

Investigation on Etch Performance of Focused Ion Beam