Abstract:This paper proposes a voltage balancing method for series-connected devices in a bidirectional CLLC resonant converter. Series connection of power devices can allow the CLLC resonant converter working in high or medium voltage applications. The key problem of series-connected power devices is the voltage imbalance between devices caused by device parameter spread and gate drive delays. An active clamping module (ACM) is in parallel with each of the series-connected power device. Each ACM consists of a clamping capacitor and an auxiliary switch with an anti-parallel diode. During the switching period, the power device voltage will be clamped at the voltage of ACM capacitor. By balancing the voltages of ACM capacitors, we can balance the voltages of series-connected power devices as well. The charging and discharging of ACM capacitor are introduced. The design process of discharge time is given. A balancing control method for ACM capacitors is proposed. Experimental results from a CLLC prototype with 4 power Schottky silicon carbide diode series-connected are provided to verify the effectiveness and feasibility of the proposed method. The imbalance degree of these series-connected devices is less than 3% under different voltage and load conditions. The peak efficiency reaches 97.7%.

Compact Power Dividers Embedded with LCL and CLC Units

A Compact Gysel Power Divider with Unequal Power-Dividing Ratio Using One Resistor

Compact Resonator Filters And Power Dividers Designed With Simplified Meta-Structures

Compact Design of Dual-Band Power Divider with Coupled-Line Shunt Elements

Flexible Design of a Compact Coupled-Line Power Divider

A New Compact Power Divider Based on Capacitor Central Loaded Coupled Microstrip Line

Compact microstrip power dividers with slow wave structure and capacitor loading

A Power Divider Based on a New Kind of Composite Right/left-Handed Transmission Line （CRLH TL） Unit

Miniaturized Wilkinson Power Dividers with Harmonic Suppressions

Compact filtering power divider with good frequency selectivity and wide stopband based on composite right‐/left‐handed transmission lines

A 1 Mw Power-Efficient High Frequency CML 2:1 Divider

Series-Connected Power Devices in a CLLC Resonant Converter for DC Transformer Applications

Design of Compact Dual-Band Power Dividers with Frequency-Dependent Division Ratios Based on Multisection Coupled Line

A Novel Harmonics-Suppression Coupled-Line Gysel Power Divider for Complex Terminated Impedances

Miniaturized Microstrip Wilkinson Power Divider with EBG Structure

Novel design of compact quad‐band divider using stepped impedance coupled lines

Design of A Compact Wilkinson Power Divider with High Order Harmonics Suppression

Compact Dual-Band Gysel Power Divider Based on Composite Right- and Left-Handed Transmission Lines

A new design of compact microstrip Wilkinson power dividers

Capacitively Loaded Wilkinson Power Divider with Size Reduction and Harmonic Suppression

Millimeter Wave Compact Power Divider Based on Micro-coaxial Lines