Abstract:Magnetic Resonance Imaging (MRI) is an indispensable tool in monitoring lipid-rich tissues and the musculoskeletal system. It however requires maintaining a huge homogeneous (1 to 7 T) field. That is where superconductors come into play since they are the only feasible way to create such fields. The state-of-the-art technology utilizes low critical temperature superconductors (LTS) which require cooling down to liquid helium temperatures (4.2K). The new generation superconductors, aka the high critical temperature superconductors (HTS), can operate up to relatively elevated temperatures (technically above 100K's). In addition to that, they can withstand larger magnetic field strengths which can theoretically go up to the order of hundred Teslas in magnitude. It is evident that LTS wires of current MRI magnet technology is at their limits and new pursuits such as reaching higher fields and reducing operational/maintenance costs are in the favor of HTS tapes. There is, in fact, another advantage beyond minimization of the cryogenic costs, namely the compactness of the overall system. Utilizing certain auxiliary techniques such as flux pumping and conductive cooling of the tapes, MRI magnets can be reduced in size substantially. That, in turn, enables constructing much smaller thus mobile MRI scanners which can be brought to patients’ doorsteps. Here we present the current status of our project aiming to build an HTS MRI machine dedicated to use as a mobile head scanner.

Use of Bi-2223 Multifilamentary Tapes As RF Coils for 1.5 T MRI Application

TAPE HIGH-TEMPERATURE SUPERCONDUCTING RF COILS FOR MRI

IMAGING PROPERTIES OF Bi-TAPE HIGH-TEMPERATURE SUPERCONDUCTING RF COILS FOR MRI*

Development of High Magnetic Field Magnet Technologies for the Magnetic Resonance Medical Imaging

On using tape to make a toroidal coil

2T HTS Bi-2223 TAPE MAGNET

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

Current Status in Building a Compact and Mobile HTS MRI Instrument

Improvement Method of Signal-to-noise Ratio for a Low Field MRI System

Fabrication and Test of Nb3Sn-NbTi Superconducting Joint for a 14-T MRI Magnet

Conceptual Design of a HTS CICC Coil for Fusion Devices based on Bi-2223 Tapes

Subwavelength Dielectric Waveguide for Efficient Travelling-Wave Magnetic Resonance Imaging

The Optimal Design of a 300~MJ Superconducting Magnet Using HTS Tapes

Conceptual Design of 3-T All HTS MRI Using No-Insulation Winding Technology: Electromagnetic Stress Reinforced Structure

Electromagnetic Design of 1.5 T No-Insulation REBCO Coil System Charged by Multiflux Pumps for Dedicated MRI

Mechanical characteristics of Bi-2223 tape with a low matrix ratio

Signal-to-Noise Ratio Improvement by Bi-2223 Surface RF Coil in 0.3T MRI System

Long Lengths of Silver-Clad Bi2223 Superconducting Tapes with High Current-Carrying Capacity

Superconducting and low temperature RF Coils for Ultra-Low-Field MRI: A Study on SNR Performance

High-Tc Superconductor Detection Coils for a Magnetic Resonance System

Experimental Study on Quality Factor of Superconducting Receiving Coil for MRI