Abstract:This study introduces a novel volume coil design that features two slotted end-plates connected by six rungs, resembling the traditional birdcage coil. The end rings are equipped with six evenly distributed circular slots, inspired by Mansfield's cavity resonator theory, which suggests that circular slots can generate a baseline resonant frequency. One notable advantage of this proposed coil design is its reduced reliance on electronic components compared to other volume coils, making it more efficient. Additionally, the dimensions of the coil can be theoretically computed in advance, enhancing its practicality. To evaluate the performance and safety of the coil, electromagnetic field and specific absorption rate simulations were simulated using a cylindrical saline phantom and the finite element method. Furthermore, a transceiver coil prototype optimized for 7 Tesla and driven in quadrature was constructed, enabling whole-body imaging of rats. The resonant frequency of the coil prototype obtained through experimental measurements closely matched the theoretical frequency derived from Mansfield's theory. To validate the coil design, phantom images were acquired to demonstrate its viability and assess its performance. These images also served to validate the magnetic field simulations. The experimental results aligned well with the simulation findings, confirming the reliability of the proposed coil design. Importantly, the prototype coil showcased significant improvements over a similarly-sized birdcage coil, indicating its potential for enhanced performance. The noise figure was lower in the prototype versus the birdcage coil (NFbirdcage-NFslotcage= 0.7). Phantom image data were also used to compute the image SNR, giving SNRslotcage/SNRbirdcage= 34.36/24.34. By proving the feasibility of the coil design through successful rat whole-body imaging, the study provides evidence supporting its potential as a viable option for high-field MRI applications on rodents.

Signal-to-Noise Ratio Improvement by Bi-2223 Surface RF Coil in 0.3T MRI System

MRI Coil Design Using Boundary-Element Method with Regularization Technique: A Numerical Calculation Study

SNR-optimized Approach for the Design of RF Surface Coils for Permanent MRI Systems

A Structure Design Method for Reduction of MRI Acoustic Noise.

Bio-inspired surface coil for small-bore MRI at 15.2 T

Near-Field Coupling Coil System: A Novel Radiofrequency Coil Solution for MRI

Calculating Efficient Noise Resistance of RF Coils in Low Field MRI Systems

Superconducting and low temperature RF Coils for Ultra-Low-Field MRI: A Study on SNR Performance

Improving Local SNR of a Single-Channel 54.6 Mt MRI System Using Additional LC-resonator.

Multimodal surface coils for low field MR imaging

Multimodal surface coils for low-field MR imaging

Helmholtz Coil‐Inspired Volumetric Wireless Resonator for Magnetic Resonance Imaging

Cryogenic receive coil and low noise preamplifier for MRI at 0.01T

An Optimized Quadrature RF Receive Coil for Very-Low-field (50.4 Mt) Magnetic Resonance Brain Imaging.

RF coil that minimizes electronic components while enhancing performance for rodent MRI at 7 Tesla

Design and simulation of the radio-frequency coils of magnetic resonance imaging

Screen-printed flexible MRI receive coils

A new method to improve RF safety of implantable medical devices using inductive coupling at 3.0 T MRI

Recent Progress in Birdcage RF Coil Technology for MRI System

A deep brain stimulation–conditioned RF coil for 3T MRI

A high-Q metasurface signal isolator for 1.5T surface coil magnetic resonance imaging on the go