Abstract:This study introduces a novel volume coil design that features two slotted end-plates connected by six rungs, resembling the traditional birdcage coil. The end rings are equipped with six evenly distributed circular slots, inspired by Mansfield's cavity resonator theory, which suggests that circular slots can generate a baseline resonant frequency. One notable advantage of this proposed coil design is its reduced reliance on electronic components compared to other volume coils, making it more efficient. Additionally, the dimensions of the coil can be theoretically computed in advance, enhancing its practicality. To evaluate the performance and safety of the coil, electromagnetic field and specific absorption rate simulations were simulated using a cylindrical saline phantom and the finite element method. Furthermore, a transceiver coil prototype optimized for 7 Tesla and driven in quadrature was constructed, enabling whole-body imaging of rats. The resonant frequency of the coil prototype obtained through experimental measurements closely matched the theoretical frequency derived from Mansfield's theory. To validate the coil design, phantom images were acquired to demonstrate its viability and assess its performance. These images also served to validate the magnetic field simulations. The experimental results aligned well with the simulation findings, confirming the reliability of the proposed coil design. Importantly, the prototype coil showcased significant improvements over a similarly-sized birdcage coil, indicating its potential for enhanced performance. The noise figure was lower in the prototype versus the birdcage coil (NFbirdcage-NFslotcage= 0.7). Phantom image data were also used to compute the image SNR, giving SNRslotcage/SNRbirdcage= 34.36/24.34. By proving the feasibility of the coil design through successful rat whole-body imaging, the study provides evidence supporting its potential as a viable option for high-field MRI applications on rodents.

Bio-inspired surface coil for small-bore MRI at 15.2 T

Unconventional Gradient Coil Designs in Magnetic Resonance Imaging.

RF coil that minimizes electronic components while enhancing performance for rodent MRI at 7 Tesla

A Novel Metamaterial-Inspired RF-coil for Preclinical Dual-Nuclei MRI

Multimodal surface coils for low-field MR imaging

A Compact Planar Triple-Nuclear Coil for Small Animal 1H, 13C, and 31P Metabolic MR Imaging at 14.1 T

SNR-optimized Approach for the Design of RF Surface Coils for Permanent MRI Systems

Compact metamaterial-inspired RF coil based on split-ring resonators to enhance the magnetic field for 1.5T magnetic resonance imaging

Proton/Deuterium Magnetic Resonance Imaging of Rodents at 9.4T Using Birdcage Coils

A Self-Matched Leaky-Wave Antenna for Ultrahigh-Field MRI with Low SAR

Dual-Channel Transverse Fields Radiofrequency Coils for 1.5 T Magnetic Resonance Imaging

Screen-printed flexible MRI receive coils

Signal-to-Noise Ratio Improvement by Bi-2223 Surface RF Coil in 0.3T MRI System

Experimental development and evaluation of a volume coil with slotted end-rings coil for rat MRI at 7 T

Multimodal surface coils for low field MR imaging

Energy harvesting coil for circularly polarized fields in magnetic resonance imaging

Design, construction, and use of a tapered‐spiral, quadrature 1H/23Na double‐tuned coil for in ovo MRI at 7 T

Wireless, Customizable Coaxially-shielded Coils for Magnetic Resonance Imaging

Open birdcage coil for head imaging at 7T

Optimization of a Close-Fitting Volume RF Coil for Brain Imaging at 6.5 mT Using Linear Programming

An Asymmetric Birdcage Coil Design for <sup>19</sup>F Lung MR Imaging at 1.5 T