Abstract:Radio frequency (RF)-induced heating associated with medical implants is a critical concern when performing a magnetic resonance imaging (MRI) scan. The purpose of this study is to construct a “digital twin” of RF coil integrated in an MRI scanner by <inline-formula> <tex-math notation="LaTeX">$B_{1}^{+}$ </tex-math></inline-formula> map matching, reproducing the physical electromagnetic (EM) field, allowing it to be a qualified test environment for heating evaluations. <inline-formula> <tex-math notation="LaTeX">$B_{1}^{+}$ </tex-math></inline-formula> map inside an American Society for Testing Material (ASTM) phantom with various positions was used to characterize the physical EM field. A loaded tuned two-port birdcage body coil model was established to generate the numerical EM field and optimized to minimize the difference between the measured and simulated fields, which was quantified by “mean symmetric mean absolute percentage error” (mSMAPE). The amplitude of the simulated field was normalized to MR sequence labeling. Finally, the average specific absorption rate (SAR) inside the ASTM phantom was measured in a calorimetry experiment and compared to simulation one heated by the pre-established coil. A heating experiment was performed on an insulated cable to further validate the established test environment. The impact of excitation parameters and the port location was investigated. mSMAPE of the optimized field was less than 10%. The difference between the simulated and measured average SAR was 8.5%. <inline-formula> <tex-math notation="LaTeX">$R^{2}$ </tex-math></inline-formula> for the linear regression of the temperature rise and predicted power deposition using the optimized field was 0.993. The digital twin was successfully constructed and verified a sufficiently accurate description of the physical field. The established construction method of the digital twin provides a handy choice for building RF test environment and may create more possibilities for the development of this area.

An Asymmetric Birdcage Coil Design for <sup>19</sup>F Lung MR Imaging at 1.5 T

Design of an insertable cone-shaped gradient coil matrix for head imaging with a volumetric finite-difference method

A Feasibility Study of Geometric-Decomposition Coil Compression in MRI Radial Acquisitions.

Unconventional Gradient Coil Designs in Magnetic Resonance Imaging.

An asymmetrical whole-body birdcage RF coil without RF shield for hyperpolarized 129 Xe lung MR imaging at 1.5 T

Coupled stack-up volume RF coils for low-field open MR imaging

Recent Progress in Birdcage RF Coil Technology for MRI System

Proton/Deuterium Magnetic Resonance Imaging of Rodents at 9.4T Using Birdcage Coils

Coupled stack-up volume RF coils for low-field MR imaging

Open birdcage coil for head imaging at 7T

Design and simulation of the radio-frequency coils of magnetic resonance imaging

RF coil that minimizes electronic components while enhancing performance for rodent MRI at 7 Tesla

Constructing a Digital Twin of the Birdcage Coil in an MR Scanner by Map Matching: For Radio Frequency Heating Evaluation of Implantable Medical Devices

A proton birdcage coil integrated with interchangeable single loops for multi-nuclear MRI/MRS

A Compact Planar Triple-Nuclear Coil for Small Animal 1H, 13C, and 31P Metabolic MR Imaging at 14.1 T

MRI Birdcage Coil for Non-Invasive Marine Products Sensing at 1.5 T

Near-Field Coupling Coil System: A Novel Radiofrequency Coil Solution for MRI

Volumetric wireless coils for breast MRI: A comparative analysis of metamaterial-inspired coil, Helmholtz coil, ceramic coil, and solenoid

Bio-inspired surface coil for small-bore MRI at 15.2 T

An Optimized Quadrature RF Receive Coil for Very-Low-field (50.4 Mt) Magnetic Resonance Brain Imaging.

Screen-printed flexible MRI receive coils