Properties of seven-filament Cu/Ag-sheathed (Ba,K)Fe 2 As 2 tapes fabricated from round and square wires
Zhen-Kun Jin,Cong Liu,Chao Yao,Liu Li,He Huang,Dong-Liang Wang,Chi-Heng Dong,Kai Wang,Xian-Ping Zhang,Satoshi Awaji,Yan-Wei Ma
DOI: https://doi.org/10.1007/s12598-021-01734-z
IF: 6.318
2021-01-01
Rare Metals
Abstract:Iron-based superconductor, a promising candidate for high-field applications, has attracted significant attentions. For practical utilization, the superconducting tapes should have high transport critical current density ( J c ), low production cost, larger mechanical strength and good homogeneity. In this study, seven-filament Cu/Ag-sheathed (Ba,K)Fe 2 As 2 tapes were fabricated from round and square wires. It is found that the tapes rolled from square wires have a desirable uniformity of filament deformation and distribution, compared with the ones rolled from round wires. Moreover, the J c of tape was obviously improved by using square drawing dies instead of traditional round ones. For the tapes rolled from square wires annealed under ambient and 2 MPa by hot pressing, the transport J c values reached 1.51 × 10 4 A·cm −2 and 4.86 × 10 4 A·cm −2 (4.2 K, 10 T), respectively. The deformation process on the cross section of the tapes during rolling was analyzed by using the powder-flow model. These results indicate a potential application of Cu/Ag (Ba,K)Fe 2 As 2 tapes in high-magnetic-field region. Graphical abstract