Abstract:The magnetic field loss and properties of magnetic response of Bi2223/Ag tape are investigated by Wattmeter technique in 77K and lower magnetic longitudinal field, the magnetic loss is composed of surface loss, hysteresis and couple loss. The minimum magnetic field is less than 1×10{-4}T. The magnetic field loss of Bi2223/Ag monofilamentary tape is similar to bulk superconductor, and the loss has the exponent relation with magnetic field, namely Q∝Hn; while HH-{c1}, n is about 1.2～1.8, the loss is mainly surface loss; while H-{c1}HH-p, n is equal to 3, the loss is mainly hysteresis; and HH-p, n is about 1.1, the loss is also hysteresis. From the loss curve of monofilamentary tape, we can get the lower critical magnetic field (H-{c1}) of Bi2223 phase and the value is about 6×10{-4}T. The magnetic field loss of Bi2223/Ag multifilamentary tape consists of hysteresis from superconductor filament and couple loss between superconductor filaments, but couple loss is dominating. The loss and magnetic field also accord with exponent relation of Q∝Hn, while HH-p (H-p refers to the penetration magnetic field and H-p is nearly equal to H-{c1} in this sample.), n is nearly 2, the loss is mostly couple loss, the surface loss is negligible; While HH-p, n is about 1.7, the loss is composed of hysteresis and couple loss, the couple loss is dominating. The loss of monofilamentary and multifilamentary tape in magnetic field that is less than 1×10{-4}T are never reported before. The response relation between the penetration voltage in superconductor and external magnetic field is studied. The relation curve between penetration voltage and external is displayed, the reasonable explanation of the curve is given by the change of magnetization strength.

Mechanical Properties Of (Bi,Pb)-2223 Multifilament Tapes With Ag-Alloy Sheath

Fabrication and properties of some Ag-alloy sheathed Bi-2223 tapes

Mechanical properties of several sheath silver alloys used in BSCCO tapes

STUDY ON THE MECHANICAL PROPERTY OF AgMgV ALLOYS USED IN BSCCO TAPES

Fabrication and Characterization of Ni-clad Bi-2223/Ag Superconducting Tapes

Soldering of Bi-2223/Ag high temperature superconducting tapes with Sn–Pb–Bi–Ag alloy paste

Fabrication of Bi-System High Temperature Superconducting Powder

MAGNETIC FIELD LOSS AND PROPERTIES OF MAGNETIC RESPONSE OF Bi2223/Ag TAPE

Effect of Lead Oxide Compounds on Microstructure and Critical Current Density of (Bi,pb)-2223/Ag Tapes

Mechanical characteristics of Bi-2223 tape with a low matrix ratio

Effect of Pre-Treatment on the Microstructure and Superconducting Properties of Bi-2223/Ag Tapes

Effect of post-annealing on critical current density of (Bi,Pb)-2223/Ag tapes

Effect of Lead Oxide Compounds on the Microstructure and Properties of Bi-2223/Ag Tapes

AC Loss Measurement of Bi-2223 Conductors

Fabrication of Bi-2223 Superconducting Thick Films Via A Non-Vacuum Method on Silver Foil Substrates

Effects of the Cooling Rate on the Microstructure and Properties of (Bi,Pb)-2223/Ag Tapes

Biaxially Textured (bi, Pb)(2)Sr2Ca2Cu3Ox Thin Films on LaAlO3 Substrates Fabricated Via the Chemical Solution Deposition Method

Homogeneity Study of Bi-2223/Ag Monofilamentary Tapes Using Hall Sensor Magnetometry

Property of Joint Resistance of Bi2223 Multi-filamentary Tape by Using Sn-Pb Solder

Scaling Behavior of AC Susceptibility of Multifilament Bi-2223/Ag Superconducting Tape

The influence of the first heat-treatment on the critical current density of (Bi,Pb)-2223/Ag superconducting tapes