Abstract:Resonator micro optic gyro (RMOG) is a promising candidate for applications requiring small, light and robust gyros. In optical passive ring resonator gyros, clockwise and counter clockwise lightwaves are modulated at different frequencies to reduce the backscattering induced noise. The effectiveness of this technique, however, is determined by the carrier suppression level. Accurate modulation index and high environmental temperature stability is required for achieving high total carrier suppression for the traditional single phase modulation technique (SPMT). In this paper, we propose an RMOG based on the double phase modulation technique (DPMT). Compared with the traditional SPMT, two additional phase modulations are added to provide additional carrier suppression. It is found that the control accuracy of the modulation index and temperature stability is relaxed more than 30 times. It is easily performed for reducing the backscattering error below the shot noise limited sensitivity. The modulation parameters in the DPMT are analyzed and optimized. Based on the optimum parameters of the DPMT, a bias stability of 1.85 x 10(-4) rad/s is successfully demonstrated in the polarization maintaining silica waveguide resonator with the length of 7.9 cm. This is the best result reported to date, to the best of our knowledge, for a waveguide type passive ring resonator gyro. (C) 2011 Optical Society of America

Use Thermal Resistor to Compensate the Temperature Drift of the Y Waveguide

The Compensation of Y Waveguide Temperature Drifts in Fog with the Thermal Resistor

An Improved Temperature Compensation Circuit for SLD Light Source of Fiber-Optic Gyroscope

Study of Wavelength Temperature Stability of Multifunctional Integrated Optical Chips Applied on Fiber Optic Gyroscopes

Temperature Modeling of Modulation Phase Error in the Integrated Optical Chip for Closed-Loop Interferometric Fiber Optic Gyroscope

A Software-Compensation Method to Orthogonal Magnetic Field Drift in A Depolarized Fiber-Optic Gyroscope

Nonreciprocal Phase Shift Caused by Magnetic-Thermal Coupling of A Polarization Maintaining Fiber Optic Gyroscope

Improving the Scale Factor Thermal Stability of Resonant Fiber-Optic Gyroscopes by Tracking the Half-Wave Voltage of the Phase Modulator

Improving thermal stability of a closed-loop resonant fiber-optic gyroscope using a double demodulation technique

Polarization-fluctuation Induced Drift in Resonator Micro Optic Gyro

An Open-Loop RFOG Based on 2nd/4th Harmonic Feedback Technique to Suppress Phase Modulation Index’s Drift

Improving Long-Term Stability of a Resonant Micro-Optic Gyro by Reducing Polarization Fluctuation

Polarization error in resonant micro-optic gyroscopewith different waveguide-type ring resonatorstructures

Reducing Polarization-Fluctuation Induced Drift in Resonant Fiber Optic Gyro by Using Single-Polarization Fiber.

Improving Thermal Stability Of A Resonator Fiber Optic Gyro Employing A Polarizing Resonator

Compensation of thermal strain induced polarization nonreciprocity in dual-polarization fiber optic gyroscope.

Research on the Half-Wave Voltage Stability of Y Waveguide in FOG

Polarization maintaining silica waveguide resonator optic gyro using double phase modulation technique.

Thermal Induced Nonreciprocity In Fiber Optic Sensors Based On Sagnac Interferometer

Temperature Characteristic of Ring Resonator in Polarization Maintaining Silica Optical Waveguide

Improving Thermal Stability of a Resonant Fiber Optical Gyroscope Using Triple Closed Loops