Abstract:We present how the laser diode (LD) current tuning induced intensity modulation affects the performance of an open-loop resonator fibre optic gyro (R-FOG) with sinusoidal wave modulation. The expression for the demodulation curve under intensity modulation caused by the dynamic input rotation angular rate and varied environmental factors induced resonance frequency drift is provided. Numerical investigation shows that under the intensity modulation effect due to dynamic input rotation angular rate, which results in a bending trend for the linear part of demodulation curve, the linearity of R-FOG system is deteriorated, and the scale factor nonlinearity of gyro output increases as the frequency-intensity conversion coefficient of the LD increases. By simulating the demodulation curve with different amount of resonance frequency drift due to varied environmental factors, the slope of the linear part is found to fluctuate under the resonance frequency drift induced intensity modulation, and it causes the scale factor of the practical R-FOG system to fluctuates. This scale factor fluctuation results in a system measurement error, which is proven to increase as the amount of resonance frequency drift or input rotation angular rate increases, and numerical calculation result shows this large system error should be counted for an open-loop R-FOG system.

The Compensation of Y Waveguide Temperature Drifts in Fog with the Thermal Resistor

Use Thermal Resistor to Compensate the Temperature Drift of the Y Waveguide

Study of Wavelength Temperature Stability of Multifunctional Integrated Optical Chips Applied on Fiber Optic Gyroscopes

Analysis on the Temperature Fluctuating of FOG′s Source

Nonreciprocal Phase Shift Caused by Magnetic-Thermal Coupling of A Polarization Maintaining Fiber Optic Gyroscope

A Software-Compensation Method to Orthogonal Magnetic Field Drift in A Depolarized Fiber-Optic Gyroscope

An Improved Temperature Compensation Circuit for SLD Light Source of Fiber-Optic Gyroscope

Optical Compensation Technology for Magnetic Drift in Depolarized FOG Induced by Orthogonal Magnetic Field

A Temperature Drift Compensation Method Applied to Fiber Optic Gyroscope North-Seeking

Temperature Modeling of Modulation Phase Error in the Integrated Optical Chip for Closed-Loop Interferometric Fiber Optic Gyroscope

Research on the Mean-Wavelength Drift Mechanism of SLD Light Source in FOG

Improving the Scale Factor Thermal Stability of Resonant Fiber-Optic Gyroscopes by Tracking the Half-Wave Voltage of the Phase Modulator

Research on the Half-Wave Voltage Stability of Y Waveguide in FOG

Improving Long-Term Stability of a Resonant Micro-Optic Gyro by Reducing Polarization Fluctuation

Polarization-fluctuation Induced Drift in Resonator Micro Optic Gyro

Polarization error in resonant micro-optic gyroscopewith different waveguide-type ring resonatorstructures

Improving Thermal Stability Of A Resonator Fiber Optic Gyro Employing A Polarizing Resonator

Reducing Polarization-Fluctuation Induced Drift in Resonant Fiber Optic Gyro by Using Single-Polarization Fiber.

Improving thermal stability of a closed-loop resonant fiber-optic gyroscope using a double demodulation technique

How Laser Diode (LD) Intensity Modulation Induced by Current Tuning Affects the Performance of an Open-loop Resonator Fibre Optic Gyro (R-FOG) with Sinusoidal Wave Modulation

Compensation of thermal strain induced polarization nonreciprocity in dual-polarization fiber optic gyroscope.