Abstract:The resonant fiber-optic gyroscope (RFOG) with a broadband light source has recently emerged as an attractive new type optical gyroscope. However, the use of a broadband source limits the linear dynamic range and worsens the scale factor accuracy. In this article, the closed-loop scheme of the broadband source-driven RFOG is proposed and demonstrated. First, a novel method called the period-stacking method is presented. Then the closed-loop mechanism of the broadband source system is revealed. Although the rotation-induced frequency difference is wavelength-dependent in the broadband source scheme, we are pleased to find that the frequency shift generated by the serrodyne modulation is wavelength-independent and can be used to compensate for the rotation information. Finally, a closed-loop broadband source-driven RFOG with a 100 m-long and 7.6 cm-diameter fiber-optic ring resonator is experimentally demonstrated. The measured result shows that the long-term bias stability of the closed-loop broadband source-driven RFOG is 0.0063 °/h over a test time of up to 500 minutes. The temperature dependence drops from 2.8 (°/h)/°C in the open-loop system to 0.54 (°/h)/°C. It is improved by a factor of 5.2. The open-loop linear detection range of ±50 °/s is improved to ±350 °/s. It is improved by a factor of 7. The open-loop scale factor nonlinearity of 8% is decreased to 0.0281% (281 ppm), which is improved by a factor of 285.

Improving the Scale Factor Thermal Stability of Resonant Fiber-Optic Gyroscopes by Tracking the Half-Wave Voltage of the Phase Modulator

Research on Resonance Splitting under Sinusoidal Modulation in Resonant Optic Fiber Gyro

Study of Wavelength Temperature Stability of Multifunctional Integrated Optical Chips Applied on Fiber Optic Gyroscopes

Influence of intensity noise on the resonant fiber optic gyroscope and restraining

An Open-Loop RFOG Based on 2nd/4th Harmonic Feedback Technique to Suppress Phase Modulation Index’s Drift

Improving Thermal Stability of a Resonant Fiber Optical Gyroscope Using Triple Closed Loops

Reduction of High-Frequency Laser Noise in Resonant Fiber Optic Gyroscope with a Phase-Modulated Feedback Loop

Optimization of Reciprocal Modulation Parameters in Resonant Fiber Optic Gyro

Resonant Fiber Optic Gyro Based on A Sinusoidal Wave Modulation and Square Wave Demodulation Technique

An Open-Loop RFOG Based on Harmonic Division Technique to Suppress LD's Intensity Modulation Noise

A Miniaturized Compact Open-Loop RFOG with Demodulation Signal Compensation Technique to Suppress Intensity Modulation Noise

Improving thermal stability of a closed-loop resonant fiber-optic gyroscope using a double demodulation technique

Analysis on Phase Modulation Spectroscopy of Resonator Fiber Optic Gyro

Signal processing improvement of passive resonant fiber optic gyroscope using a reciprocal modulation-demodulation technique

Improving the Performance of Broadband Source-Driven Resonant Fiber-Optic Gyroscopes

Closed-Loop Resonant Fiber-Optic Gyroscope with a Broadband Light Source

Improving Thermal Stability Of A Resonator Fiber Optic Gyro Employing A Polarizing Resonator

Closed-loop resonant fiber optic gyro with an improved digital serrodyne modulation.

Performance Improvement of a Resonant Fiber Optic Gyroscope with a Hybrid Photonic Crystal Fiber Ring Resonator.

Open-Loop Experiments in a Resonator Fiber-Optic Gyro Using Digital Triangle Wave Phase Modulation

Resonant fiber optic gyroscope using a reciprocal modulation and double demodulation technique