Abstract:Resonator Fiber optic gyro (RFOG) is a high accuracy inertial rotation sensor based on the Sagnac effect. The optical fiber ring resonator (OFRR) is the key rotation sensing element. The backscattering characteristics of the OFRR are fully investigated. The Rayleigh backscattering dominates the backscattering spectrum with the input power below the threshold. High carrier suppression is crucial to reduce this Rayleigh backscattering error. Being different from the intrinsic Rayleigh scattering of the fiber, the stimulated Brillouin scattering (SBS) in the OFRR should be avoided. This is because the finesse and the resonance notch depth of the OFRR decrease for the pump depletion through the SBS process. The shot noise limited sensitivity (SLS) of the RFOG is improved by increasing the input power. Through analysis, it is found that the threshold input power is improved after phase modulation. The SLS of the RFOG is analyzed at different modulation parameters and its relevant SBS threshold. Accordingly, the optimized modulation frequency and the corresponding maximum input power are all obtained. A simple method of testing the frequency shift in the SBS is also proposed. In this method, the central frequency of the laser source is locked to the resonance frequency of the OFRR in one direction. A steady SBS light is observed and its frequency shift is measured together.

Signal processing improvement of passive resonant fiber optic gyroscope using a reciprocal modulation-demodulation technique

Optimization of Reciprocal Modulation Parameters in Resonant Fiber Optic Gyro

Resonant fiber optic gyroscope using a reciprocal modulation and double demodulation technique

Angular Random Walk Improvement of a Fiber-Optic Gyroscope Using an Active Fiber Ring Resonator

Research on Resonance Splitting under Sinusoidal Modulation in Resonant Optic Fiber Gyro

Reduction of High-Frequency Laser Noise in Resonant Fiber Optic Gyroscope with a Phase-Modulated Feedback Loop

Resonant Fiber Optic Gyro Based on A Sinusoidal Wave Modulation and Square Wave Demodulation Technique

An Open-Loop RFOG Based on Harmonic Division Technique to Suppress LD's Intensity Modulation Noise

An Open-Loop RFOG Based on 2nd/4th Harmonic Feedback Technique to Suppress Phase Modulation Index’s Drift

Analysis on Phase Modulation Spectroscopy of Resonator Fiber Optic Gyro

Optimization of the sinusoidal phase modulation technique in resonant fiber optic gyro

Modulation Spectrum Analysis and Optimization for Closed-Loop RFOG under Dynamic Condition

Improving the Performance of Broadband Source-Driven Resonant Fiber-Optic Gyroscopes

Closed-loop resonant fiber optic gyro with an improved digital serrodyne modulation.

Research Progress of the Resonant Fiber Optic Gyroscope Technology

Reduction of relative intensity noise in a broadband source-driven RFOG using a high-frequency modulation technique

A Miniaturized Compact Open-Loop RFOG with Demodulation Signal Compensation Technique to Suppress Intensity Modulation Noise

Resonator Fiber Optic Gyro Using the Triangle Wave Phase Modulation Technique

Double closed-loop resonator fiber optic gyro with improved digital serrodyne modulation

Open-Loop Experiments in a Resonator Fiber-Optic Gyro Using Digital Triangle Wave Phase Modulation

Full investigation of the backscattering in resonator fiber optic gyro