Abstract:The resonant fiber-optic gyroscope (RFOG) with a broadband light source has recently emerged as an attractive new type optical gyroscope. However, the use of a broadband source limits the linear dynamic range and worsens the scale factor accuracy. In this article, the closed-loop scheme of the broadband source-driven RFOG is proposed and demonstrated. First, a novel method called the period-stacking method is presented. Then the closed-loop mechanism of the broadband source system is revealed. Although the rotation-induced frequency difference is wavelength-dependent in the broadband source scheme, we are pleased to find that the frequency shift generated by the serrodyne modulation is wavelength-independent and can be used to compensate for the rotation information. Finally, a closed-loop broadband source-driven RFOG with a 100 m-long and 7.6 cm-diameter fiber-optic ring resonator is experimentally demonstrated. The measured result shows that the long-term bias stability of the closed-loop broadband source-driven RFOG is 0.0063 °/h over a test time of up to 500 minutes. The temperature dependence drops from 2.8 (°/h)/°C in the open-loop system to 0.54 (°/h)/°C. It is improved by a factor of 5.2. The open-loop linear detection range of ±50 °/s is improved to ±350 °/s. It is improved by a factor of 7. The open-loop scale factor nonlinearity of 8% is decreased to 0.0281% (281 ppm), which is improved by a factor of 285.

Improving Thermal Stability of a Resonant Fiber Optical Gyroscope Using Triple Closed Loops

Reduction of High-Frequency Laser Noise in Resonant Fiber Optic Gyroscope with a Phase-Modulated Feedback Loop

Improving thermal stability of a closed-loop resonant fiber-optic gyroscope using a double demodulation technique

Improving the Scale Factor Thermal Stability of Resonant Fiber-Optic Gyroscopes by Tracking the Half-Wave Voltage of the Phase Modulator

Improving Thermal Stability Of A Resonator Fiber Optic Gyro Employing A Polarizing Resonator

Triple Closed-Loop Resonant Fiber Optic Gyroscope

Closed-Loop Resonant Fiber-Optic Gyroscope with a Broadband Light Source

An Open-Loop RFOG Based on Harmonic Division Technique to Suppress LD's Intensity Modulation Noise

An Open-Loop RFOG Based on 2nd/4th Harmonic Feedback Technique to Suppress Phase Modulation Index’s Drift

Performance Improvement of a Resonant Fiber Optic Gyroscope with a Hybrid Photonic Crystal Fiber Ring Resonator.

A Miniaturized Compact Open-Loop RFOG with Demodulation Signal Compensation Technique to Suppress Intensity Modulation Noise

Full Investigation of the Resonant Frequency Servo Loop for Resonator Fiber-Optic Gyro.

Closed-loop resonant fiber optic gyro with an improved digital serrodyne modulation.

Double closed-loop resonator fiber optic gyro with improved digital serrodyne modulation

Performance Improvement of White-Light-driven Resonant Fiber Optic Gyroscope Using Four-Frequency Sawtooth Wave Modulation Technology

On a Closed-loop Resonator Fibre Optic Gyro (R-FOG) Employing a Semiconductor Laser

Improving the Performance of Broadband Source-Driven Resonant Fiber-Optic Gyroscopes

Resonant Fiber Optical Gyroscope Using the Single-Mode Fiber Ring Resonator.

Performance of a Resonant Fiber-Optic Gyroscope Based on a Broadband Source

Reduction of polarization-fluctuation induced drift in resonator fiber optic gyro by a resonator integrating in-line polarizers.

White-light-driven Resonant Fiber-Optic Gyro Based on Round Trip Filtering Scheme.