Abstract:The resonant fiber-optic gyroscope (RFOG) with a broadband light source has recently emerged as an attractive new type optical gyroscope. However, the use of a broadband source limits the linear dynamic range and worsens the scale factor accuracy. In this article, the closed-loop scheme of the broadband source-driven RFOG is proposed and demonstrated. First, a novel method called the period-stacking method is presented. Then the closed-loop mechanism of the broadband source system is revealed. Although the rotation-induced frequency difference is wavelength-dependent in the broadband source scheme, we are pleased to find that the frequency shift generated by the serrodyne modulation is wavelength-independent and can be used to compensate for the rotation information. Finally, a closed-loop broadband source-driven RFOG with a 100 m-long and 7.6 cm-diameter fiber-optic ring resonator is experimentally demonstrated. The measured result shows that the long-term bias stability of the closed-loop broadband source-driven RFOG is 0.0063 °/h over a test time of up to 500 minutes. The temperature dependence drops from 2.8 (°/h)/°C in the open-loop system to 0.54 (°/h)/°C. It is improved by a factor of 5.2. The open-loop linear detection range of ±50 °/s is improved to ±350 °/s. It is improved by a factor of 7. The open-loop scale factor nonlinearity of 8% is decreased to 0.0281% (281 ppm), which is improved by a factor of 285.

A closed-loop RFOG based on digital serrodyne and sine modulations with two LiNbO3 phase modulators

Modulation Spectrum Analysis and Optimization for Closed-Loop RFOG under Dynamic Condition

Closed-loop RFOG Based on Square Wave Quadrature Demodulation

Closed-loop resonant fiber optic gyro with an improved digital serrodyne modulation.

An Open-Loop RFOG Based on Harmonic Division Technique to Suppress LD's Intensity Modulation Noise

Research on digital signal detection method in closed loop fiber gyros

Double closed-loop resonator fiber optic gyro with improved digital serrodyne modulation

Optimization of Reciprocal Modulation Parameters in Resonant Fiber Optic Gyro

Reduction of High-Frequency Laser Noise in Resonant Fiber Optic Gyroscope with a Phase-Modulated Feedback Loop

An Open-Loop RFOG Based on 2nd/4th Harmonic Feedback Technique to Suppress Phase Modulation Index’s Drift

A Miniaturized Compact Open-Loop RFOG with Demodulation Signal Compensation Technique to Suppress Intensity Modulation Noise

Design and Implementation of the Digital Detection Circuit for RFOG Based on a Single FPGA

Resonant Fiber Optic Gyro Based on A Sinusoidal Wave Modulation and Square Wave Demodulation Technique

Performance of Closed-Loop Resonant Micro Optic Gyro with Hybrid Digital Phase Modulation

On a Closed-loop Resonator Fibre Optic Gyro (R-FOG) Employing a Semiconductor Laser

A Harmonic Subtraction Technique to Suppress Intensity Modulation Induced Kerr Effect Drift in a Closed-Loop RFOG

Closed-Loop Resonant Fiber-Optic Gyroscope with a Broadband Light Source

Double Closed-Loop Resonant Micro Optic Gyro Using Hybrid Digital Phase Modulation.

Signal processing improvement of passive resonant fiber optic gyroscope using a reciprocal modulation-demodulation technique

Reduction of relative intensity noise in a broadband source-driven RFOG using a high-frequency modulation technique

Resonator Fiber Optic Gyro Employing a Semiconductor Laser.