Abstract:In this paper, how the phase modulation index’s drift affects an open-loop resonator fiber optic gyro’s (RFOG’s) performance is discussed. By using the ratio of the second to fourth harmonic (2nd/4th harmonic), a harmonic feedback technique is proposed to suppress this drift. It is found that the phase modulation index’s drift would lead to a significant measurement error, which increases with rotation rate. It is proven that there exists an approximately linear correlation between phase modulation index and 2nd/4th harmonic. Using this correlation, the 2nd/4th harmonic feedback technique is applied to the open-loop RFOG to stabilize the phase modulation index. Although the phase modulation index slightly deviates from its optimal value in the dynamic state with this technique, it is proven that the induced backscatter noise could be neglected. The test results indicate that the phase modulation index’s drift with this technique is reduced to about 22% of that without suppression technique, and the stabilities of gyro output signal are respectively improved by about 29% and 31% under 5deg/s and 10deg/s when this technique is used. It is concluded that the 2nd/4th harmonic feedback technique does work in suppressing the phase modulation index’s drift.

Improving thermal stability of a closed-loop resonant fiber-optic gyroscope using a double demodulation technique

Improving Thermal Stability of a Resonant Fiber Optical Gyroscope Using Triple Closed Loops

A Hollow-Core Photonic-Crystal Fiber-Optic Gyroscope Based on a Parallel Double-Ring Resonator.

Study of Wavelength Temperature Stability of Multifunctional Integrated Optical Chips Applied on Fiber Optic Gyroscopes

Improving the Scale Factor Thermal Stability of Resonant Fiber-Optic Gyroscopes by Tracking the Half-Wave Voltage of the Phase Modulator

Improving Thermal Stability Of A Resonator Fiber Optic Gyro Employing A Polarizing Resonator

Optimization of Reciprocal Modulation Parameters in Resonant Fiber Optic Gyro

Resonant fiber optic gyroscope using a reciprocal modulation and double demodulation technique

Triple Closed-Loop Resonant Fiber Optic Gyroscope

Signal processing improvement of passive resonant fiber optic gyroscope using a reciprocal modulation-demodulation technique

Improving Long-Term Stability of a Resonant Micro-Optic Gyro by Reducing Polarization Fluctuation

Reduction of High-Frequency Laser Noise in Resonant Fiber Optic Gyroscope with a Phase-Modulated Feedback Loop

An Open-Loop RFOG Based on 2nd/4th Harmonic Feedback Technique to Suppress Phase Modulation Index’s Drift

Improving the Performance of Broadband Source-Driven Resonant Fiber-Optic Gyroscopes

Performance Improvement of a Resonant Fiber Optic Gyroscope with a Hybrid Photonic Crystal Fiber Ring Resonator.

Resonator micro-optic gyroscope based on the double phase modulation technique

Double Closed-Loop Resonant Micro Optic Gyro Using Hybrid Digital Phase Modulation.

Double closed-loop resonator fiber optic gyro with improved digital serrodyne modulation

Closed-loop Resonant Fiber-Optic Gyroscope Based on a Broadband Source

Reducing Polarization-Fluctuation Induced Drift in Resonant Fiber Optic Gyro by Using Single-Polarization Fiber.

Performance of a Resonant Fiber-Optic Gyroscope Based on a Broadband Source