Abstract:Boron particles have several major burning problems, such as incomplete combustion, poor ignitability, and a complex burning process in solid propellants. It is documented that the low ignitability and combustion efficiency of boron are caused by the oxidation of its surface. In order to improve the combustion efficiency of boron particles, a precipitation method was employed to prepare nanometer-sized NiO and coat it on boron particles. The morphology and coating results of the B/NiO nanocomposite thermite were characterized using different approaches such as SEM, X-ray Diffraction (XRD), and EDS. The results indicated that the boron particles were well distributed and coated completely by nanocomposite NiO. The B/NiO nanocompo-site thermite reaction process was tested by TG-DTA. The results showed that the reaction temperature of B/NiO particles is about 30 degrees C lower than that of boron particles. The B/NiO thermite and boron powder were added to Mg/PTFE propellant to be measured for their respective combustion performance. The results showed that the burning rate of the B/NiO-Mg/PTFE propellant increased by 22.8-25.2%, mass burning rate by 26.7-30.8%, and combustion temperature increased by 8-56 degrees C compared to the B-Mg/PTFE propellant. The above results indicate that NiO coating of boron particles has a significant effect on the combustion behavior and increases the combustion performance of the propellant compared with uncoated particles.

Low-temperature Combustion Synthesis and Characterization of Nanosized Tetragonal Barium Titanate Powders

Low-temperature combustion synthesis of nanometer tetragonal barium titanate powders

The Effect of Processing Parameters on Low-Temperature Combustion Synthesis Barium Titanate Powders

LOW TEMPERATURE COMBUSTION SYNTHESIS AND ITS DIELECTRIC PROPERTY OF BARIUM TITANATE

Sol–gel Synthesis and Sintering of Nano-Size Li2TiO3 Powder

Room-Temperature Synthesis of BaTiO<sub>3</sub>Nanoparticles in Large Batches

Process for Non-Agglomerated Nanometer-Sized Barium Titanate Powders by Sol-Gel Auto-Igniting Synthesis

Synthesis of Highly Dispersed Barium Titanate Nanoparticles by a Novel Solvothermal Method

Low-temperature Preparation of Pure BaTiO_(3) by SAG Method

Low-temperature Synthesis of TiB2 Nanocrystals Using TiO2 ,LiBH4 and Mg

Hydrothermal Synthesis of Tetragonal Barium Titanate Nanopowders under Moderate Conditions

Preparation of La-0.Sr-9(0).Ga-1(0).Mg-8(0).O-2(2).(85) ultrafine powder by low temperature combustion synthesis

Low-temperature Synthesis and Analysis of Barium Titanate Nanoparticles with Excess Barium

A New Method for Synthesizing Li2.06nb0.18ti0.76o3 Powder at Low Temperatures

Composition and shape control of single-crystalline Ba1-xSrxTiO3 (x=0-1) nanocrystals via a solvothermal route

PREPARATION OF NANOSIZED Bi3.25 La0.75 Ti3 O12 POWDER BY COPRECIPITATION METHOD

Preparation and Properties of Boron‐Based Nano‐B/NiO Thermite

The Synthesis of Ultrafine Ba/Sr Titanate Powders

Study on the Hydrothermal Synthesis of Barium Titanate Nano-Powders and Calcination Parameters

Progress on Preparation Technology of Barium Titanate Powder Used in Electronic Ceramic

Direct Synthesis of Ultrafine Tetragonal BaTiO3 Nanoparticles at Room Temperature