Abstract:BaTiO3 (BT) nanoparticles were prepared by the hydrothermal technique using different starting materials and the microstructure examined by XRD, SEM, TEM and HRTEM. X-ray diffraction and electron diffraction patterns showed that the nanoparticles were the cubic BaTiO3 phase. The BT nanoparticles prepared from the starting materials of as-prepared titanium hydroxide and barium hydroxide have spherical grain morphology, an average size of 65 nm and a fairly narrow size distribution. A uniform diffraction contrast across each single grain is observed in the TEM images, and the clear lattice fringes (with d(110) = 0.28 nm) observed in HRTEM images reveal that well-crystallized BT nanoparticles are synthesized by the hydrothermal method. The edges of the particles are very smooth, with no surface steps. BT nanoparticles with average grain size of 90 nm, synthesized using barium hydroxide and titanium dioxide as the starting materials, show surface facets. In this case a bimodal size distribution of large faceted and smaller particles is observed. Diffraction contrast variation across the particles caused by high strains within the particles is clearly observed. The high strains obviously stem from structural defects formed during hydrothermal synthesis, presumable in the form of lattice OH- ions and their compensation by cation vacancies. HRTEM images demonstrate that surface facets parallel to the (100) and (110) planes and small islands with 3 similar to 4 atomic layer thickness are frequently observed around the edge of the particles.

Synthesis and Characterization of BaTiO3 Nanopowders Via Solvothermal Method

Room-Temperature Synthesis of BaTiO<sub>3</sub>Nanoparticles in Large Batches

Synthesis of Highly Dispersed Barium Titanate Nanoparticles by a Novel Solvothermal Method

Composition and shape control of single-crystalline Ba1-xSrxTiO3 (x=0-1) nanocrystals via a solvothermal route

Microstructural Characterization of BaTiO3 Ceramic Nanoparticles Synthesized by the Hydrothermal Technique

Preparation and Characterizations of Nanosized BaTiO3 Ceramic Powder

Investigation on the Synthesis Procedure of Ultrafine Monodispersed BaTiO3 Powders by Solvothermal Method

Preparation of Single-Crystalline BaTi5O11 Nanocrystals by Hydrothermal Method

Size-controlled synthesis of BaTiO3 nanocrystals via a hydrothermal route

Hydrothermal synthesis of high-purity BaTiO3 powders: control of powder phase and size, sintering density, and dielectric properties

Ba 4 Ti 13 O 30 Nanocrystals Prepared by Hydrothermal Method

Synthesis of Nanopowders of Ba(Ti0.8Zr0.2)O3

Preparation and Characterization of Monodispersed BaTiO3 Nanocrystals Using One-Step Solvothermal Method

Preparation And Characterization Of Nano-Yb2o3/Tio2 Particles

Structure and Electrical Properties of BaTiO3 Prepared by Sol–gel Process

Molten-salt Synthesis of BaTiO3 Powders and Their Atomic-Scale Structural Characterization

Low-temperature Synthesis of TiB2 Nanocrystals Using TiO2 ,LiBH4 and Mg

Hydrothermally synthesized Pb0.70La0.30TiO3 powders

Phase Structure Of Nanocrystalline Batio3 Powders Via One-Step Solvothermal Route

Microstructural Characterization of BaTiO<sub>3</sub> Ceramic Nanoparticles Synthesized by the Hydrothermal Technique

Effect of NaOH Concentration on Formation of Ba4Ti13O30 and BaTi5O11 Nanocrystals Prepared by Hydrothermal Method