Synthesis of Bio-Based Polyester Resins for Vat Photopolymerization 3D Printing

Ines Cazin,Martin Ocepek,Janez Kecelj,Aleš Stanislav Stražar,Sandra Schlögl

DOI: https://doi.org/10.3390/ma17081890

IF: 3.4

2024-04-20

Materials

Abstract:Driven by environmental considerations, the scientific community has directed great effort towards the synthesis of new materials derived from renewable resources. However, for photocurable resins, most commercially available building blocks still rely on petroleum-based precursors. Herein, we present a simple synthesis route for bio-based acrylate-modified polyester resins, whose viscosity is sufficiently low for processing them with vat photopolymerization 3D printing. The established synthesis route enables the gradual substitution of fossil-based raw materials with bio-based alternatives. The acid number, color and viscosity of the bio-based acrylic resins are characterized and photocurable formulations are prepared by adding a radical photoinitiator. The photopolymerization kinetics, and thermomechanical and mechanical properties of the photopolymers are investigated as a function of the resin structure and benchmarked against a commercially available petroleum-based counterpart. Finally, the processability of the new bio-based resins via digital light processing 3D printing is demonstrated and test specimens are successfully 3D printed with a resolution in the millimeter range.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering

What problem does this paper attempt to address?

The paper aims to address the development of a bio-based photocurable polyester resin derived from renewable resources as an environmentally friendly alternative to commercially available petroleum-based derivatives and to evaluate its suitability for photopolymerization 3D printing.

Specifically, the research team synthesized a novel bio-based polyester resin by gradually replacing components in traditional polyester acrylate (PEA), such as hexanediol, cyclohexanedimethanol, and adipic acid, with bio-based materials (such as 1,3-propanediol, sebacic acid, succinic acid, isosorbide, and itaconic acid). The focus of the study is to assess the impact of these bio-based components on the resin's molecular weight, viscosity, and curing kinetics to determine their suitability for 3D printing applications. Additionally, the mechanical properties, thermomechanical properties, and color characteristics of these resins were investigated, and the printability of these new materials was validated using digital light processing (DLP) 3D printing technology.