A renewably sourced, circular photopolymer resin for additive manufacturing

Thiago O. Machado,Connor J. Stubbs,Viviane Chiaradia,Maher A. Alraddadi,Arianna Brandolese,Joshua C. Worch,Andrew P. Dove

DOI: https://doi.org/10.1038/s41586-024-07399-9

IF: 64.8

2024-05-16

Nature

Abstract:The additive manufacturing of photopolymer resins by means of vat photopolymerization enables the rapid fabrication of bespoke 3D-printed parts. Advances in methodology have continually improved resolution and manufacturing speed, yet both the process design and resin technology have remained largely consistent since its inception in the 1980s 1 . Liquid resin formulations, which are composed of reactive monomers and/or oligomers containing (meth)acrylates and epoxides, rapidly photopolymerize to create crosslinked polymer networks on exposure to a light stimulus in the presence of a photoinitiator 2 . These resin components are mostly obtained from petroleum feedstocks, although recent progress has been made through the derivatization of renewable biomass 3,4,5,6 and the introduction of hydrolytically degradable bonds 7,8,9 . However, the resulting materials are still akin to conventional crosslinked rubbers and thermosets, thus limiting the recyclability of printed parts. At present, no existing photopolymer resin can be depolymerized and directly re-used in a circular, closed-loop pathway. Here we describe a photopolymer resin platform derived entirely from renewable lipoates that can be 3D-printed into high-resolution parts, efficiently deconstructed and subsequently reprinted in a circular manner. Previous inefficiencies with methods using internal dynamic covalent bonds 10,11,12,13,14,15,16,17 to recycle and reprint 3D-printed photopolymers are resolved by exchanging conventional (meth)acrylates for dynamic cyclic disulfide species in lipoates. The lipoate resin platform is highly modular, whereby the composition and network architecture can be tuned to access printed materials with varied thermal and mechanical properties that are comparable to several commercial acrylic resins.

multidisciplinary sciences

What problem does this paper attempt to address?

The main problem this paper attempts to address is the development of a renewable and recyclable photopolymer resin for 3D printing. Existing photopolymer resins are primarily derived from petroleum-based materials and are difficult to recycle, limiting their sustainability and environmental friendliness. The authors propose a novel photopolymer resin platform based on renewable fatty acids (such as naturally sourced lipoic acid). This resin not only enables high-resolution 3D printing but can also be efficiently depolymerized and reused chemically, forming a closed-loop material recycling system.

Specifically, the paper addresses the following key issues:
1. **Sustainability of raw materials**: Using renewable biomass-derived raw materials to reduce dependence on petroleum-based materials.
2. **Recyclability of materials**: Introducing dynamic disulfide bonds allows the printed materials to be efficiently depolymerized back to the original monomers, enabling material reuse.
3. **Diversity of performance**: By adjusting the resin composition and network structure, materials with different thermal and mechanical properties can be obtained to meet various application needs.
4. **Environmental friendliness**: Using green solvents and catalysts to reduce environmental impact and improve material safety.

Through these innovations, this research provides new ideas and solutions for achieving more sustainable and environmentally friendly 3D printing technology.