Abstract:Digital Light Processing (DLP) is a 3D printing technology that enables the fabrication of complex, high-resolutionstructures; however, the mechanical properties of DLP-printed objects are often limited by the resins used. This study focuses on developing and characterizing bio-based polyester UV-curable resins with tunable mechanical properties optimized for DLP 3D printing. Bio-based polyester resins were synthesized by direct esterification polycondensation reaction of itaconic and/or succinic acids with 1,2-propane-, 1,4-butane-, and/or 1,8-octanediols followed by blending with triethylene glycol dimethacrylate. The bio-renewable nature of the resin components provides several advantages over traditional petroleum-derived resins. The diacid and diol monomers come from renewable feedstocks such as corn, soybean, and vegetable oils rather than finite fossil fuel reserves. Furthermore, bio-renewable materials lower dependence on petrochemicals and increase the sustainability of 3D printing. The effects of diacid structure and diol chain length on resin properties were systematically investigated. Chemical characteristics were investigated by NMR and FTIR and suggested successful synthesis of the desired bio-based polyesters. By varying the molecular design, diacid, and diol building blocks, the molecular weight, crosslink density, and mechanical performance were tailored. The liquid resins were characterized by gel permeation chromatography and rheological measurements, and solid and printed objects were characterized by static and dynamic tensile testing. Rheological studies confirmed all resin formulations displayed shear-thinning behavior ideal for SLA printing. Mechanical testing revealed that varying diacid and diol components could modulate tensile elastic modulus and elongation at break from 0.1-1.0 GPa and 3.5-8.5%, respectively. Printability was assessed by printing a resolution test structure on a DLP 3D printer equipped with a 405 nm UV source. This ability to tailor the properties of bio-based polyester resins by molecular design provides an avenue for fabricating high-performance SLA-printed objects targeted for specific applications ranging from prototypes to end-use products.

Itaconic-Acid-Based Sustainable Poly(ester amide) Resin for Stereolithography

Photocurable Itaconic Acid-Functionalized Star Polycaprolactone in Biobased Formulations for Vat Photopolymerization

(Meth)acrylate-Free Three-Dimensional Printing of Bio-Derived Photocurable Resins with Terpene- and Itaconic Acid-Derived Poly(ester-thioether)s

Renewable Methacrylate Resins for 3D Printing Containing Dynamic Hydroxyester Linkages for Reprocessability

Urethane dimethacrylate-based photopolymerizable resins for stereolithography 3D printing: A physicochemical characterisation and biocompatibility evaluation

UV-curing 3D Printing of High-Performance, Recyclable, Biobased Photosensitive Resin Enabled by Dual-Crosslinking Networks

Glycerol-based Sustainably Sourced Resin for Volumetric Printing

Tailoring Mechanical Properties for Additive Manufacturing: Strategic Molecular Design of UV-Curable Bio-based Oligoester Resins via Diacid and Diol Exploration

Synthesis of Bio-Based Polyester Resins for Vat Photopolymerization 3D Printing

Tailoring Mechanical Properties for Additive Manufacturing: Strategic Molecular Design of UV-Curable Bio-based Oligomeric Polyester Resins via Diacid and Diol Exploration

Digital Light Processing-3D Printing of Thermoset Materials with High Biodegradability from Amino Acid-Derived Acrylamide Monomers

A renewably sourced, circular photopolymer resin for additive manufacturing

Phosphorescent bio-based resin for digital light processing (DLP) 3D-printing

3D Inkjet Printing of Biomaterials with Solvent‐Free, Thiol‐Yne‐Based Photocurable Inks

Acrylate-based photosensitive resin for stereolithographic three-dimensional printing

Three-Dimensional Printing Fully Biobased Heat-Resistant Photoactive Acrylates from Aliphatic Biomass

3D Printable Materials Based on Renewable Polymers from Terpene Alcohols and Calcium Carbide

Solvent-Free Digital Light 3D Printing using Biodegradable Polymeric Photoinitiators

Synergistic Effect of Physical and Chemical Cross-Linkers Enhances Shape Fidelity and Mechanical Properties of 3D Printable Low-Modulus Polyesters

Sustainable and Recyclable Acrylate Resins for Liquid-Crystal Display 3D Printing Based on Lipoic Acid

Multi-Material 3D Printing of Biobased Epoxy Resins