Abstract:Digital Light Processing (DLP) is a 3D printing technology that enables the fabrication of complex, high-resolutionstructures; however, the mechanical properties of DLP-printed objects are often limited by the resins used. This study focuses on developing and characterizing bio-based polyester UV-curable resins with tunable mechanical properties optimized for DLP 3D printing. Bio-based polyester resins were synthesized by direct esterification polycondensation reaction of itaconic and/or succinic acids with 1,2-propane-, 1,4-butane-, and/or 1,8-octanediols followed by blending with triethylene glycol dimethacrylate. The bio-renewable nature of the resin components provides several advantages over traditional petroleum-derived resins. The diacid and diol monomers come from renewable feedstocks such as corn, soybean, and vegetable oils rather than finite fossil fuel reserves. Furthermore, bio-renewable materials lower dependence on petrochemicals and increase the sustainability of 3D printing. The effects of diacid structure and diol chain length on resin properties were systematically investigated. Chemical characteristics were investigated by NMR and FTIR and suggested successful synthesis of the desired bio-based polyesters. By varying the molecular design, diacid, and diol building blocks, the molecular weight, crosslink density, and mechanical performance were tailored. The liquid resins were characterized by gel permeation chromatography and rheological measurements, and solid and printed objects were characterized by static and dynamic tensile testing. Rheological studies confirmed all resin formulations displayed shear-thinning behavior ideal for SLA printing. Mechanical testing revealed that varying diacid and diol components could modulate tensile elastic modulus and elongation at break from 0.1-1.0 GPa and 3.5-8.5%, respectively. Printability was assessed by printing a resolution test structure on a DLP 3D printer equipped with a 405 nm UV source. This ability to tailor the properties of bio-based polyester resins by molecular design provides an avenue for fabricating high-performance SLA-printed objects targeted for specific applications ranging from prototypes to end-use products.

Synthesis and Characterization of Polyurethane Acrylate with Bio-oil Modification for Photo-curing 3D Printed Flexible Structures

Preparation of photosensitive resin based on poly (trimethylene ether glycol) for 3D printing

Eugenol-Based Siloxane Acrylates for Ultraviolet-Curable Coatings and 3D Printing

Improving the 3D Printability and Mechanical Performance of Biorenewable Soybean Oil-Based Photocurable Resins

Synthesis and characterization of tung oil-based UV curable for three-dimensional printing resins

Three-Dimensional Printing Fully Biobased Heat-Resistant Photoactive Acrylates from Aliphatic Biomass

Green Synthesis of Soybean Oil-Derived UV-Curable Resins for High-Resolution 3D Printing

Precision 4D Printing of Multifunctional Olive Oil‐Based Acrylate Photo‐resin for Biomedical Applications

UV-Light Curing of 3D Printing Inks from Vegetable Oils for Stereolithography

Synthesis and properties of a low-viscosity UV-curable oligomer for three-dimensional printing

Non-Isocyanate Urethane Acrylate Derived from Isophorone Diamine: Synthesis, Characterization and Its Application in 3D Printing

Thermal stability of UV-cured vegetable oil epoxidized acrylate-based polymer system for 3D printing application

Effect of isobornyl acrylate and hexanediol diacrylate on the properties of UV-curable resin developed from suberic acid-derived polyester polyol

Fully Bio-Based Polymer Composites: Preparation, Characterization, and LCD 3D Printing

Tailoring Mechanical Properties for Additive Manufacturing: Strategic Molecular Design of UV-Curable Bio-based Oligomeric Polyester Resins via Diacid and Diol Exploration

Progress in Photocurable 3D Printing of Photosensitive Polyurethane: A Review

Properties of thermoplastic polyurethane synthesized from bio‐based diisocyanate for FDM 3D printing

Engineering multifunctional UV-polymerizable imidazolidinyl urea-based methacrylate resin for 3D printing: Synthesis, characterization, and antimicrobial properties

Tailoring Mechanical Properties for Additive Manufacturing: Strategic Molecular Design of UV-Curable Bio-based Oligoester Resins via Diacid and Diol Exploration

Synthesis of Bio-Based Polyester Resins for Vat Photopolymerization 3D Printing

(Meth)acrylate-Free Three-Dimensional Printing of Bio-Derived Photocurable Resins with Terpene- and Itaconic Acid-Derived Poly(ester-thioether)s